"I" range

Product catalog summary

Technical Data Overview

This document provides technical specifications for multitubular heat exchangers designed for cooling oil, water, or fuel using untreated or sea water. Two models are detailed: I052 and I083.

Model I052 Specifications

Dimensions: Core diameter and length are specified, with a core length of 221 mm.
Materials: Constructed with Copper-Nickel tubes, Brass tube plates and baffles, Aluminium shell, Bronze water connections, and Viton O-rings.
Performance: Maximum water flow rate is 115 L/min, with a maximum working pressure of 2.86 bar.
Geometry: Features outside tubes for oil/water/fuel and inside tubes for water, with specific inlet and outlet tube dimensions.

Model I083 Specifications

Dimensions: Core diameter and length are specified, with a core length of 457 mm.
Materials: Similar construction materials as Model I052.
Performance: Maximum water flow rate is 320 L/min, with a maximum working pressure of 8.53 bar.
Geometry: Similar tube configuration as Model I052, with different inlet and outlet tube dimensions.

General Information

Both models are designed for efficient heat exchange using untreated or sea water.
Specifications include detailed measurements and material compositions to ensure compatibility and performance.

Catalog excerpts

TECHNICAL DATA MULTITUBULAR HEAT EXCHANGER Oil-Water-Fuel / Water I052 oil inlet / outlet water inlet/outlet Cooling of oil / water / fuel by untreated water or sea water Core length Number of passes on cold side miruRECREATIONAL www.motarecreational.com

Open the catalog to page 1

TECHNICAL DATA MULTITUBULAR HEAT EXCHANGER Oil-Water-Fuel / Water I083 oil inlet / outlet a water inlet / outlet Hot side: G 1/2" (BSP) Cold side: 050 mm Cooling of oil / water / fuel by untreated water or sea water mutdREC R EAT IONAL www.motarecreational.com

Open the catalog to page 2

"I" range

"I" range

Catalog excerpts

All MOTA catalogs and technical brochures