Technical Summary of Heat Exchanger Performance Data

1. Specific Heat Transfer Characteristics

The document provides specific heat transfer values expressed in kW/°C, ranging from 0.05 to 0.95. These values correspond to different flow rates of glycol (QGlycol) measured in liters per minute (L/min).

2. Glycol Flow Rate and Operating Ranges

The glycol flow rates are indicated from 0 to 40 L/min, with standard operating ranges specified for different heat exchanger models:

• Model G058-235-1
• Model G058-175-1
• Model G058-116-1

The water flow rate (Qw) is specified between 55 to 145 L/min.

3. Pressure Parameters

Pressure differentials are noted as follows:

• Oil side pressure (DPoil): 250 mbar to 2000 mbar
• Water side pressure (Qw): Not explicitly detailed but implied within flow ranges

4. Operating Fluid and Temperature

The heat exchangers operate with a mixture of 50% glycol and water at an inlet temperature of 85°C.

5. Notes and Recommendations

The document mentions that these guide values are subject to change without notice and recommends contacting the supplier to confirm selections based on thermal specifications.

6. Limitations and Usage

The data appears to be a guideline for selecting heat exchangers based on specific heat transfer rates, flow rates, and pressure conditions. Users should verify current specifications before finalizing equipment choices.