*mydirectindustry

Catalogs
Morsettitalia
04_Electronic Evolution

04_Electronic Evolution

1 / 68 PagesView full catalog

04_Electronic Evolution

Product catalog summary

Static Relay Module Specifications

Input Data: The module operates on a rated voltage of 12-24V DC, is optically isolated, and supports both PNP and NPN control. It features a maximum control frequency of less than 2 KHz, yellow LED signaling, and inverted peak diode protection.
Input Circuit: Control voltage ranges from 10-30V DC with a maximum control current of 8mA +/-10%.
Protection and Diagnostic: Includes autoreset current protection at 4.5 A, inverse polarity protection, and transient suppression. LED indicators for power (red), voltage (green), and error (orange) are provided.
Output Data: Utilizes Mos-Fet open contact type with a power voltage of 12 or 24V DC and an operating voltage range of 10-30V DC.
Output Circuit: Rated current is 4A, with a maximum current of 8A for 10ms.

Electromechanical Relay Specifications

General Data: Dimensions are 88x71x6.3 mm, with IP20 protection and cURus certification. Overvoltage category is III, with dielectric strength of 4kV for 60s.
Input Data: Rated voltage varies from 12-240V AC/DC depending on the model, with power consumption ranging from 170mW to 210mW.
Output Data: Contact type is 1 CO with AgSnO2 material, rated current AC1 is 6A, and max switching voltage is 250VAC/30VDC.

Solid State Relay Interface

General Data: Similar dimensions and protection as electromechanical relays, with a rated voltage of 6-24V DC.
Output Data: Rated current AC1 is 2A with Mos-Fet contact type, and rated voltage is 24VDC.

Additional Information

Accessories and additional protection features are available upon request.
Drawings and dimensions are provided on page 34 and 44.

Wiring Diagram Overview
This document provides technical specifications and wiring diagrams for various electronic components, including electromechanical and solid-state relays, programmable temperature converters, and signal converters. The technical data is considered typical and should be used as a general guide.

Electromechanical and Solid-State Relays

Miniature Relay Specifications: Available in input voltages of 12V, 24V, 48V, and 60V DC. Dimensions are 28x5x15 mm, with an operating temperature range of -40 to +85°C. Mechanical endurance is rated at 10 million operations.
Solid State Relay Specifications: Input voltage is 24V DC, with a control pick-up voltage of 15V DC. Operating temperature range is -30 to +80°C.

Programmable Temperature Converter

General Data: Dimensions are 110x88x5.1 mm, with a weight of 40 grams. Operating temperature range is -10 to +60°C, with an IP20 protection category.
Technical Data: Rated voltage is 24V DC, with a signal resolution of 18 bits. The temperature range for PT100 sensors is -200 to +600°C.

Programmable Signal Converter

General Data: Similar dimensions and weight as the temperature converter. Operating temperature range is -10 to +60°C.
Technical Data: Rated voltage is 24V DC, with a signal resolution of 21 bits. Input resistance is 100K ohms, and the output can be programmed for 0-5VDC or 0-10VDC.

Protection and Diagnostics
Both converters feature voltage LED signaling, control LED signaling, inverted peak diode protection, and spike protection on power.

Software Configuration
The products can be configured via PC using downloadable software from the manufacturer's website.

Programmable Signal Converter Overview
This document provides technical specifications and configuration details for a programmable signal converter. The product can be configured using a PC with downloadable software from the Morsettitalia website. The software supports various modules including 88H2M-RTD, 88H2M-TC, 88H2M-Hz, 88H2M-VDC, and 88H2M-A.

Technical Specifications
The converter operates within a voltage range of 14-28V and is available with or without plug-in connectors. It features a typical technical data profile, which should be considered as standard.

Accessories and Components
The document lists various accessories such as Europlug Q connectors, marking tags, and insulated jumpers. Specifications include dimensions, conductor compatibility, pitch, poles, mounting positions, and tightening torque. For example, connectors support rigid and flexible conductors ranging from 0.5 to 2.5 mm² and have a stripping length of 9 mm.

Standards and Compliance
The products comply with several standards, including CEI EN 60984, CEI EN 60068-2-6, CEI EN 61010-1, and UL 508. They are marked with CE and conform to the European Directive 2011/65/CE (RoHS 2).

Disclaimer
The catalogue does not constitute a contractual obligation, and Morsettitalia reserves the right to modify products without notice. While technical data is accurate, no liability is accepted for errors or omissions. Products are safe when used by qualified personnel in prescribed applications.

Catalog excerpts

Soluzioni di elettronica Electronic Evolution Indice Index TRASMETTITORE UNIVERSALE UNIVERSAL TRANSMITTER TRASMETTITORE UNIVERSALE UNIVERSAL TRANSMITTER 8 FRONTALINO DI PROGRAMMAZIONE PROGRAMMING FRONT DISPLAY 16 EURO 88“ five.one ” INTERFACCIA RELE’ RELAY INTERFACES INTERFACCIA RELE’ - 5,1mm RELAY INTERFACES - 5,1mm THICKNESS 20 SUPPORTO RELE’ - 5,1mm EMPTY SOCKET - 5,1mm THICKNESS 27 MODULO RELE’ STATICO STATIC RELAY MODULE 30 INTERFACCIA RELE’ RELAY INTERFACES INTERFACCIA RELE’ - 6,3mm RELAY INTERFACE - 6,3mm THICKNESS 36 ZOCCOLI RELE’ - 6,3mm EMPTY SOCKET - 6,3mm THICKNESS 43 MINI RELE’ (SLIM)...

Open the catalog to page 3

Soluzioni di elettronica Electronic Evolution TRASMETTITORE UNIVERSALE / UNIVERSAL TRANSMITTER 884114 Ingressi per RTD, TC, Ohm, potenziometri, mA e V / Input for RTD, TC, Ohm, potentiometer, mA and V Alimentazione tecnica due fili >16 V 2-‐wire supply >16 V Montaggio a parete o su guida DIN / DIN rail or panel mounting Uscita di corrente e tensione / Output for current and voltage Uscita con due relè / Output with 2 relays Alimentazione AC/DC AC/DC supply Disponibile per tutti i modelli / Available for all models INTERFACCIA...

Open the catalog to page 4

Soluzioni di elettronica Electronic Evolution INTERFACCIA RELE’ / RELAY INTERFACE Interfaccia Relè / Relay Interface Supporto / Empty Socket Connessione a Vite / S/ Relay Interface Interfaccia Relè crew Connection Connessione a Vite / Empty Connection Supporto / Screw Socket 88B2H3024U1 Connessione a Vite / Screw Connection 88B2H3024D1 Connessione a Vite / Screw Connection MODULO RELE’ STATICO / STATIC RELAY MODULE Modulo Rele' Statico Static Relay Module Connettori a Vite Connettori a Molla Screw Connectors Spring Connectors 88H2M3030D325...

Open the catalog to page 5

Soluzioni di elettronica Electronic Evolution Legenda Simboli / Key to symbols Connessioni a molla/ Spring Connections Connessioni a vite / Screw Connections Spessore 6,3 mm / 6,3 mm Thikness Connettori estraibili / Plug-in connectors Relè elettromeccanico - 1 CO / Electromechanical relay - 1 CO Relè stato solido - statico / Solid state relay - static relay Trasmettitore universale / Universal transmitter Convertitore di temperatura / Temperature converter Convertitore di segnale / Signal converter Uscita con 2 relè / Output with 2 relays Relè di ricambio / Spare relay

Open the catalog to page 6

Soluzioni di elettronica Electronic Evolution EURO 88 Trasmettitore Universale Universal Transmitter

Open the catalog to page 7

Soluzioni di elettronica Electronic Evolution TRASMETTITORE CON USCITA ANALOGICA / TRANSMITTER WITH ANALOGUE OUTPUT Pag. 8 Convertitore di segnale con uscita analogica / Signal converter with analogue output DATI GENERALI / GENERAL DATA Ingressi per RTD, TC, Ohm, potenziometri, mA e V / Input for RTD, TC, Ohm, potentiometer, mA and V Alimentazione con tecnica due fili >16 V / 2-wire supply >16 V Montaggio a parete o su guida DIN / DIN rail or panel mounting Uscita in corrente e tensione / Output for current and voltage Alimentazione universale AC/DC / Universal AC/DC supply APPLICAZIONI /...

Open the catalog to page 8

Soluzioni di elettronica Electronic Evolution CARATTERISTICHE TECNICHE / TECHNICAL CHARACTERISTICS SPECIFICHE GENERALI / GENERAL SPECIFICATIONS Campo di funzionamento / Temperature range CARATTERISTICHE COMUNI / COMMON SPECIFICATIONS Alimentazione, universale / Supply voltage, universal Consumo massimo / Max Consumption Fusibile / Fuse Tensione di isolamento / Isolation voltage - test/operation Interfaccia di comunicazione / Communications interface Rapp. segnale/rumore / Signal/Noise Ratio Tempo di risposta / Response time (0..90%, 100...10%) Ingresso per temperatura / Temperature input Ingresso...

Open the catalog to page 9

Soluzioni di elettronica Electronic Evolution CARATTERISTICHE TECNICHE / TECHNICAL CHARACTERISTICS INGRESSO RTD, RESISTENZA LINEARE E POTENZIOMETRO/ RTD, LINEAR RESISTANCE AND POTENTIOMETER INPUT Tipo di ingresso / Input type PT100 Ni100 Resist. Lineare / Lin. R Potenziometro / Potentiometer Valore min. / Min. value Valore max. / Max value -200°C +850°C -60°C +250°C 0 Ω 10000 Ω 10 Ω 100 k Ω Ingresso per tipi di RTD / Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Input for RTD types Pt1000, Ni50, Ni100, Ni120, Ni1000 Resistenza sul cavo per filo, RTD / 50 Ω Cable resistance per wire...

Open the catalog to page 10

Soluzioni di elettronica Electronic Evolution CARATTERISTICHE TECNICHE / SPECIFICATIONS TC INGRESSO / TC INPUT Compensazione di giunto freddo / Cold junction compensation (CJC): Via sensore interno / Via internally mounted sensor Sensore di rilevamento guasto, tutti i tipi di TC / Sensor error detection, all TC type Sensore guasto di corrente / Sensor error current *Durante il rilevamento /*When detecting *Ulteriore / *Else INGRESSO DI TENSIONE / VOLTAGE INPUT USCITA DI CORRENTE/ CURRENT OUTPUT COMPATIBILITA’ CON NORME / OBSERVERD AUTHORITY REQUIREMENTS EMC 2004/108/EC Normativa / Standard Emissioni...

Open the catalog to page 11

Soluzioni di elettronica Electronic Evolution TRASMETTITORE CON USCITA ANALOGICA + 2 RELE’ / TRANSMITTERPag. 8 ANALOGUE OUTPUT + 2 RELAYS Pag. 8 WITH Convertitore di segnale con uscita analogica / Signal converter with analogue output DATI GENERALI / GENERAL DATA Ingressi per RTD, TC, Ohm, potenziometri, mA e V / Input for RTD, TC, Ohm, potentiometer, mA and V Alimentazione con tecnica due fili >16 V / 2-wire supply >16 V Montaggio a parete o su guida DIN / DIN rail or panel mounting Uscita in corrente, tensione e con due relè / Output for current, voltage and 2 relays Alimentazione universale...

Open the catalog to page 12

Open the catalog to page 13

04_Electronic Evolution

04_Electronic Evolution

Catalog excerpts

All Morsettitalia catalogs and technical brochures

Archived catalogs