*mydirectindustry

Catalogs
Morsettitalia
02_P.C.B. Terminal Blocks

02_P.C.B. Terminal Blocks

1 / 15 PagesView full catalog

02_P.C.B. Terminal Blocks

Product catalog summary

1. Product Series and Types

This document details multiple PCB terminal block and connector series from Morsettitalia S.p.A., including:

EUROPLUG Connectors: Standard EU (series 48) and USA (series 49) pitch sizes, poles from 2 to 24, with standard neutral and custom variants.
Universal EUROPLUG (series 69): Compatible with EU and USA pitches (3.5 mm to 10.16 mm), available in various connector types (frontal female, vertical female, open/closed male, double deck male).
WPS Wire Protection Systems (series 44 and 70): PCB connectors and terminal blocks with wire protection, pitches 5.00 mm to 10.16 mm, multiple mounting positions.
RCS Interlocking Modules (series 66 and 67): Multi-level rising clamp terminal blocks supporting 2.5 to 4 mm² cross-sections, with double and triple deck options.
TELEFONICHE Screw Terminal Blocks (series 68): Screw-type interlocking modules with single or double pin versions.
SCS Screwless Terminal Blocks (series 7): Screwless interlocking modules operable with or without a key, single or double pin versions.

2. Ordering Information

Ordering codes specify series, pitch, pole count, mounting position, and customer-specific variants or printing options. Suffixes indicate connector type (female/male, open/closed), pitch size, and mounting orientation (vertical, 90°, 35°, 45°).

3. Technical Specifications and Parameters

Parameter	Description
Pitch (mm)	Ranges from 3.5 mm to 10.16 mm depending on series and type.
Mounting Position	Vertical, 90°, 35°, 45°, frontal, back, and combinations.
Height (H mm)	Typically 9 mm to 22 mm, varies by series.
Pollution Degree	Usually degree 3 or 4, indicating environmental suitability.
Poles	From 2 up to 24 poles; some series support multi-level configurations.
Screw Type and Torque	M2 to M3 screws; tightening torque 2 to 4.5 Lb In (approx. 0.23 to 0.5 Nm).
Pin Diameter and Length	Diameters typically 0.8x0.8 mm or 1.0x1.0 mm; lengths 3.5 to 4.5 mm.
Degree of Protection	IP00 standard (no ingress protection).
Flammability Class	PA-UL94 V0 or PBT-FG30/UL94 V0, indicating high flame resistance.
Operating Temperature	Ranges from 80°C to 125°C depending on product.
Nominal Cross-Section (mm²/AWG)	From 1.0 mm² (26-16 AWG) up to 4 mm² (30-14 AWG).
Rated Current (A)	7 A to 16 A depending on series and cross-section.
Rated Voltage (V)	Typically 125 V to 750 V depending on product.
Approvals	C US, IMQ, and other certifications pending.

4. Product Variants and Customization

Many series offer customer-specific variants (denoted V000) and printed numbering options (COOO). Variants include different mounting positions, pole counts, and mechanical configurations such as double deck or bended terminals.

5. Key Recommendations and Best Practices

Select pitch and pole count carefully to match PCB design requirements.
Adhere to maximum tightening torque to ensure reliable electrical contact and avoid damage.
Choose products with appropriate flammability class and operating temperature for environmental conditions.
Verify product approvals and certifications for compliance with regional standards.
Utilize customer-specific variants for specialized applications or marking needs.

6. Summary of Key Data

Typical pitch sizes: 3.5 mm, 3.81 mm, 5.00 mm, 5.08 mm, 7.50 mm, 7.62 mm, 10.00 mm, 10.16 mm.
Mounting positions: vertical, 90°, 35°, 45°, frontal, back.
Operating temperatures mostly up to 125°C; some rated at 80°C or 105°C.
Rated currents from 7 A to 16 A; rated voltages up to 750 V.
Materials meet UL94 V0 flammability standards.
Protection degree IP00 standard across all products.

7. Additional Product Construction and Standards

Terminal blocks available with turned, bended, or solid clamps.
Mounting options include vertical, 90° tab, and multi-deck vertical.
Some models feature faston tabs for quick connections.
Conformity to standards: CEI EN 60998-1, 60988-2-1, 60947-1, 60947-7-1, 61984, UL 1059, C22-2 No. 158, EN 50281-1-1.
CE marking and RoHS compliance ensured.

8. Quality and Safety

Manufactured under UNI EN ISO 9001:2008 quality system certification.
Designed for safe use by qualified personnel in prescribed applications.
Catalog disclaims contractual obligations and reserves right to modify products without notice.

Conclusion

This technical catalog provides a comprehensive reference for selecting and ordering PCB terminal blocks and connectors from Morsettitalia. It includes detailed mechanical, electrical, and certification data to support proper integration into electronic assemblies, with flexibility for customer-specific adaptations and compliance with international standards.

Catalog excerpts

02 Morsetti per circuito stampato P.C.B. Terminal Blocks

Open the catalog to page 1

Come ordinare: How to order: EUROPLUG connettori ad innesto per PCB EUROPLUG Plug-in PCB connectors serie series 0000 = neutro versione standard std. version- not-printing V000 = variante costruttiva e/o num. spec. a richiesta customer request not std. items and/or printing on request connettore femmina/maschio male/female connector 0 = femmina passo-female pitch 5/5,08 1 = maschio 90° aperto-90° open male - 5/5,08 2 = maschio 90° chiuso-90° closed male - 5/5,08 3 = maschio verticale aperto-vertical right open male 5/5,08 4 = maschio verticale chiuso-vertical right closed male 5/5,08 5 = femmina...

Open the catalog to page 2

Come ordinare: How to order: RCS morsettiere a carrello componibili per PCB RCS Interlocking modules PCB rising clamp system t.b. serie series 0 = seguito da numero poli ”O” plus n° of poles 5 = passo 10 polo singolo se preceduto da 5 pitch 10 single pole preceded by “5” 5 = passo 10 90°polo singolo se preceduto da 6 pitch 10 90° single pole preceded by “6” 5 = passo 10 35°polo singolo se preceduto da 7 pitch 10 35° single pole preceded by “7” 5 = passo 10,16 90°polo singolo se preceduto da 8 pitch 10,16 90° single pole preceded by “8” 0 = passo 10,16 verticale polo singolo se preceduto da 8...

Open the catalog to page 3

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Indice di protezione/Degree of protection Autoestinguenza/Flammability class Temperatura/Operating temperature Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Indice di...

Open the catalog to page 4

Morsetti per circuito stampato P.C.B. Terminal Blocks

Open the catalog to page 5

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Temperatura/Operating temperature Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Diametro pin/PC pin diameter Ø Lunghezza pin/PC...

Open the catalog to page 6

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Massello/Clamp Temperatura/Operating temperature mm2/AWG Corrente nominale/Rated current Tensione nominale/Rated voltage Omologazioni/Approvals Sezione nominale Nominal cross-section

Open the catalog to page 7

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Massello/Clamp Temperatura/Operating temperature Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution...

Open the catalog to page 8

Morsetti per circuito stampato P.C.B. Terminal Blocks

Open the catalog to page 9

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Massello/Clamp Temperatura/Operating temperature mm2/AWG Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution...

Open the catalog to page 10

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Temperatura/Operating temperature 2 Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage

Open the catalog to page 11

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Temperatura/Operating temperature 2 Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles...

Open the catalog to page 12

Morsetti per circuito stampato P.C.B. Terminal Blocks Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles Vite/Screw Coppia Serraggio/Max tightening torque Diametro pin/PC pin diameter Ø Lunghezza pin/PC pin length mm Indice di protezione/Degree of protection Autoestinguenza/Flammability class Temperatura/Operating temperature Sezione nominale Nominal cross-section Corrente nominale/Rated current Tensione nominale/Rated voltage Passo/Pitch mm Assetto/Mounting position Altezza/Height H mm Grado di inquinamento/Pollution degree Poli/Poles...

Open the catalog to page 13