CE Marked Tilt-To-Load Drum Tumblers The Specialist In Drum Handling Equipment CE Marked Tilt-To-Load Drum Tumblers include Enclosure with Safety Interlock Rotate drum “corner-over-corner” at 4 to 16 RPM Thoroughly mix contents inside a sealed drum Easy to load upright drum at floor-level Rotate a STEEL drum Set timer to tumble up to 16 hours Tumble a steel, plastic or fiber drum: Capacity: 363 kb (800 Lb.) Full Drum Morse CE Marked Tilt-To-Load Drum Tumblers with included Enclosure and Safety Interlock are fully tested and certified compliant with European directives. Designed to rotate your drum for the time you set to thoroughly mix drum contents. Set the time of drum rotation anywhere from a few seconds to 16 hours. You can adjust the tumbling speed from 4 to 16 RPM. Once mixing is complete, use the controls to return drum to upright position at floor-level for easy handling. The enclosure has an integrated safety interlock, in accordance with European directives, so the machine automatically shuts off when the door is opened. In case of any problem during operation, the tumbler can be interrupted by pressing the red emergency stop knob. Rotate a PLASTIC drum Power connections and motor controls must comply with applicable local codes. Rotate a FIBER drum Model # Rotate a 114L (30-gallon) drum Motor CE Marked Drum Tumbler and Enclosure with Safety Interlock CE Marked Drum Tumbler and Enclosure with Safety Interlock

CE Marked Tilt-To-Load Drum Tumblers The Specialist In Drum Handling Equipment 310 SPECIFICATION SHEET (CE Marked) Capacity: Full Drum Drum Holder Specs: Drum Diameter Drum Height Machine Height: Loading Position Tumbling Position Machine Floor Space: Loading Position Tumbling Position Enclosure Height: Enclosure Floor Space: Shipping Weight: AC Motor Specs for Model 310-1-50-CE AC Motor Specs for Model 310-3-50-CE morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

The Specialist In Drum Handling Equipment CE Marked Tilt-To-Load Drum Tumblers 1. Load your upright drum at floor level with a drum truck or below-hook drum lifter 2. Secure drum in holder with ratchet strap. . . Magnet door closure 4. Close enclosure gate. Integrated safety interlock prevents drum rotation until the gate is closed, and automatically stops drum rotation if gate is opened during operation. morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

CE Marked Tilt-To-Load Drum Tumblers The Specialist In Drum Handling Equipment Control Station 5. Push START button to activate power 7. Use TILT handle to raise the drum into rotating position 6. Set timer to rotate drum for desired time, from just a few seconds... up to 16 hours 8. Use the ROLL handle to begin drum rotation 9. Adjust drum rotation from 4 to 16 RPM morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

CE Marked Tilt-To-Load Drum Tumblers The Specialist In Drum Handling Equipment Outside Post-to-Post Dimensions L223.5 cm x W132.1 cm x H160.7 cm (L88” x W52” x H63.25”) Guard Enclosure Components Qty. Wire Mesh Panel Wire Mesh Panel Hinge Door Corner Post morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.