Stainless Steel Hydra-Lift Karriers The Specialist In Drum Handling Equipment > > Click to Watch Video < < Lift and Dispense a Drum • • Frame made of Bead Blast Finish Type 304 Stainless Steel You Control Lifting Height and Pouring Angle Removes Effort and Increases Productivity Power Lift and Tilt Options Heavy-Duty Hydraulics Capacity: 800 Lb. (363 kg) full drum 500 Lb. (227 kg) half-full* drum Drum Handling System • Automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum Accepts Diameter Adapters for smaller drums Accepts Top Rim Clamp or Bracket Assembly to handle a plastic or fiber drum Flexible cover on the cinch chain helps protect drum sidewall Durable stress relief weld joints Tilt Control in Either Direction Easily handle a heavy drum with a Morse Hydra-Lift Karrier. Lift, move and control pouring of a 55-gallon (210 liter) drum weighing up to 800 Lb. (363 kg) with minimal effort. Handle a variety of drums by installing the correct accessories for your drum. Models with maximum pouring heights of 72” or 96” (183 or 244 cm). Manual Tilt Models have pull chain and chain wheel tilt control. You can raise and control dispensing as necessary. Increase pouring angle for full discharge, reduce to control the pour rate, or reverse to stop pouring and deliver partial drum contents. Model 400A-96SS-125 has 96” (2.44 m) dispensing height, battery power lift, and manual tilt Material is poured forward straight from the drum with variable lift and pour angles. Faucets, pipe, valve extensions, etc. may be attached to the drum. Each Hydra-Lift Karrier Features Heavy-duty hydraulic ram has a built-in flow control for a uniform, controlled speed of descent with even the heaviest drum. Heavy duty hydraulic lift cylinders include a velocity fuse to provide a full line shut-off in the event of a line failure. Though most often used to lift and pour, the Hydra-Lift Karrier can also be used to lift drums on and off scales, platforms, conveyors or trucks, move drums to or from storage, or position drums of parts for hand access at work stations. Manual Tilt Control Options We recommend Option # 3900SSi-P MORStop Tilt-Brake to automatically hold drum tilt angle. Easy maneuverability on two 8” (20.3 cm) durable polyolefin wheels and two 4” (10.2 cm) swivel carbon steel casters hidden under the base. A step-down floor lock to help hold Hydra-Lift Karrier in place while you dispense from drum. Option X02-400-72SS or X02-400-96SS 9” (22.9 cm) Hand Crank (shown left) Frame is made of bead blast finished type 304 stainless. Welds are not ground smooth or polished. Ratchet and pawl are not stainless steel, but are coated with FDA compliant powder coat. Gears, sprockets and chain are not stainless steel, but are covered with guards. Manual-Lift Models have hydraulic hand pump with variable release valve for drum lift. Manual-Tilt Models have covered tilt gears with 30:1 reduction to make pouring your drum simple and easy. Option # SSG-MT Stainless gears on manual tilt model Option # SSG-PT Stainless gears on power tilt model Option X03-400-72SS or X03-400-96SS 16” (40.6 cm) Hand Wheel (shown right) Reach Beyond Front Wheels with a 55-Gallon Steel Drum Model # Dispensing Height Reach with Horizontal Drum Reach with Drum Pouring at 45 Degrees 2” (5.1 cm) Option # 5597SSi-P Stainless steel ratchet and pawl Turning Radius Domestic Ship Weight * Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum. morsedrum.com

Stainless Steel Hydra-Lift Karriers The Specialist In Drum Handling Equipment Power-Lift and Tilt Models Make drum handling easier and faster. There are two hand valve controls: One for the power-lift function and a second for power-tilt. Power Option # Motor Type Motor Control Ship Weight Adder Switch, Cord, Plug On/Off Valve Electric Power Lift & Tilt Air Power Lift and Tilt Hold on/off valve and lift valve to raise the drum. Use a second valve to control the hydraulically driven drum tilt. Lower the drum with manual release valve. Air motor Requirements: 40 to 60 PSI at 40 SCFM. The MORCINCHTM...

Stainless Steel Hydra-Lift Karriers The Specialist In Drum Handling Equipment Stainless Steel Hydra-Lift Karrier Model Numbers Lift Height AC Motor *** Power Lift and Tilt Air Motor † Power Lift & Tilt 12V DC ** Power Lift & Tilt AC Motor *** Power Lift, Manual Tilt * Air Motor † Power Lift, Manual Tilt * 12V DC ** Power Lift, Manual Tilt * Manual Lift & Manual Tilt * * Manual tilt control is chain wheel and pull-chain. ** 12V DC power option includes battery and 110V AC charger. *** Standard AC motors are 1HP, 115V, 60 Hz, TEFC. Explosion-proof motors and 50Hz motors are also available. † Air...