Heavy-Duty Forklift-Karriers Models 285A-HD, 285AM-HD & 285A-HDSS The Specialist In Drum Handling Equipment Lift and Dispense a Drum with Your Forklift Heavy-Duty Forklift-Karriers - 1500 Lb. (680 kg) Capacity • Quickly mounts on forklift • Drum Handling System No tools or truck modifications No electric or hydraulic connections Allows 360o drum tilt control in both directions Eliminates backbreaking labor and dangerous, makeshift methods Model 285AM-HD has spark resistant parts s Automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum s Accepts Diameter Adapters for smaller drum s Bolt-on Top Rim Clamp or Bracket Assembly to handle a plastic or fiber drum Provides controlled drum pouring Model 285A-HDSS made of stainless steel s Includes flexible cover on the cinch chain to help protect drum sidewall Morse Heavy-Duty Forklift-Karriers have a 20’ (6 m) long pull chain loop with 10’ (3 m) drop so you control drum tilting, 360o in either direction. Dispense a drum right from your forklift. Can also be ordered with Hand Crank or Hand Wheel option for use only within reach. s Incorporates alloy cinch chain and durable stress relief weld joints 285A-HD, 285AM-HD, 285A-HDSS s Chain wheel tilt control with 60:1 gear ratio We recommend the MORStopTM Tilt-Brake option to automatically hold the drum tilt angle until operator turns it. This prevents a partially full, unbalanced drum from turning out of control, even when the contents shift from one end to the other. s Safety cover over gears s Handle drum with faucet in place MORStop Tilt-Brake Option Hand Crank Option Hand Wheel Option Adapters for Smaller Drum Forklift-Karrier with Spark Resistant Parts Stainless Steel Heavy-Duty Forklift-Karrier s 1500 Lb. (680 kg) full-drum capacity 800 Lb. (363 kg) half-full* drum capacity Half-full rating is an indication of capacity for tilting an unbalanced, bottom-heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum. Accessories Bracket Assembly for rimless plastic drum or more securely handle a fiber drum Installed Options Diameter Adapters for Smaller Diameter Drum for 55-gallon (210 liter) rimmed plastic or fiber drum We recommend MORStop Tilt-Brake factory installed on your Forklift-Karrier to automatically hold the drum tilt angle. The Bracket Assembly provides a brace at top and bottom of your drum to prevent it from slipping lengthways through the drum holder. The Bracket Assembly is required to handle a rimless plastic drum, and recommended to more securely handle a fiber drum. It adjusts for 31” to 39” (79 to 99 cm) tall drum. Kit # 4556-P Bracket Assembly Kit # 4556M-P Spark Resistant Kit # 4556SS-P Stainless Steel The Top Rim Clamp grips the upper drum rim to prevent it from slipping length-ways. Install it to safely handle a 30-gallon to 55-gallon (114 to 210 liter) size plastic or fiber drum. Kit # 4560B-P Rim Clamp Assembly Kit # 4560M-P Spark Resistant Rim Kit # 4560SS-P Stainless Steel Diameter Adapters insert into the drum holder to handle a smaller drum. Select the correct size Diameter Adapter for each drum. Spark resistant and stainless steel Diameter Adapters also available. Web Strap and Ratchet Option # 5115i-P Web Strap & Ratchet Option # 5115Mi-P Spark Resistant Option # 5115SSi-P Stainless Steel

Heavy-Duty Forklift-Karriers Models 285A-HD, 285AM-HD & 285A-HDSS The Specialist In Drum Handling Equipment Steps for use of Heavy-Duty Forklift-Karriers 1. Drive truck forks into the Heavy-Duty Forklift-Karrier’s fork pockets. Dismount and screw down the safety locks to grip the forks. Drive to a drum at ground level, so that the drum holder meets the center of your drum. Secure your drum in the drum holder between drum ribs... no tools are needed. To secure drum, drape the cinch chain with flexible chain cover across the front of the drum, insert one link into the slot on the ratchet handle,...

Heavy-Duty Forklift-Karriers The Specialist In Drum Handling Equipment