Catalog excerpts
Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Morse Model # 900 Power-Propelled < PILOT > Drum Pourer • Dispense a 1500 Lb. (680 kg) drum up to 10.5’ (3.2 m) high, and 11” (28 cm) beyond the straddle legs Power-Propelled Walk-Behind Powered Drum Lift and Rotation 360o in either direction Features the MORCINCHTM Drum Handling System for steel, plastic or fiber drum. . . and even a smaller drum Morse Model # 905 Scale-Equipped Power-Propelled < PILOT > Drum Pourer • Adds the ability to weigh an 800 Lb. (363 kg) drum while you pour Familiar Controls for propulsion and steering. Raise and Lower Buttons also incorporated in handle. 15° of handle arc actuates brake proportional to handle movement, allowing operator complete control of braking by “feathering” for accurate payload positioning through full emergency stop. When released, the handle returns to upright position and applies the brake. Morse model # 900 and 905 < PILOT > Drum Pourers feature intuitive, industry-standard throttle, steering and drum positioning controls... ...so you can put them online quickly. Morse model # 900 < PILOT > Drum Pourer is designed to lift, transport and pour a drum weighing up to 1500 Lb. (680 kg) at 25 ft/min (5 cm/sec).* Scale-equipped model # 905 has 800 Lb. (363 kg) capacity. Built-in safety systems include a proven “bellybutton” switch, which helps prevent an operator from being pinned between the < PILOT > and any other object. Upon body contact, the switch activates low speed in the opposite direction. Control the travel speed with ergonomic twist grip or thumb control. Maximum travel speed is 3.0 mph (4.8 km/hr) or 4.4 ft/sec (1.3 m/sec) with a 1500 Lb. (680 kg) drum.* Maneuver in narrow aisles with a turn radius of just 58” (147 cm) on smooth rubber rear drive wheel, and polyurethane front wheels. Traveling on a slope: The Pilot series is rated for operation up to a 5% grade when traveling with the carriage and attachment down below the high speed cutoff height. “Dead-man” braking occurs when spring loaded control handle is released, turning off electrical power and applying the brakes. Adjust straddle I.D. from 38” to 50” (96.5 to 127 cm), adjustable in 4” increments to work with various size pallets. Moving steering control handle to top and bottom Lift and Tilt Control Handles The internally mounted 24V battery has a built-in “smart” charger to provide amount of charge necessary. Simply plug into a standard 110V AC outlet with the included cord. The batteries can be fully charged from empty in about 8 hours. *Note: Maximum travel speed with a drum is 3 mph with maximum lift speed of 25 ft/ min. Lift & travel speed will increase with lighter loads.
Open the catalog to page 1Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Lift, Transport and Pour a Drum up to 10.5 feet (3.2 m) high TM Drum Handling System TM Morse < PILOT > Drum Pourers feature the MORCINCH Drum Handling System Manual-grip drum holder automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum. Standard MORCINCH Drum Holder has Cinch Chain and Ratchet with flexible chain cover OPTION 5115i-P Web Strap & Ratchet Model # 905 Scale-Equipped Drum Pourer Lift, transport and dispense a drum up to 10.5 feet (3.2 m) high! Fully invert your drum in just 8 seconds with...
Open the catalog to page 2Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment ACCESSORIES 55/30 Series Diameter Adapters for drum with diameter smaller than 22” (56 cm). To handle a smaller drum, insert the correct size Diameter Adapter into the standard drum holder. See Diameter Adapter info at: https://morsedrum.com/products/diameter-adapters ONLY Diameter Adapters for drum with 17.5” (44.5 cm) diameter or smaller have integrated brackets to prevent drum slipping length-ways. NOTE: For 30-gallon (114 Liter) PLASTIC drum, insert Diameter Adapter; AND install Bracket or Top Rim Clamp to prevent...
Open the catalog to page 3Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Dimensions of Model 900 < PILOT > Power-Propelled Drum Pourer with drum raised to maximum dispensing height Net Weight: 2230 Lb. (1012 kg) Capacity • 1500 Lb. (680 kg) Full Drum • 800 Lb. (363 kg) Half-Full Drum * * Half-full rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum. morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc.
Open the catalog to page 4Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Dimensions of Model 900 < PILOT > Power-Propelled Drum Pourer with drum lowered to floor Net Weight: 2230 Lb. (1012 kg) Capacity: 1500 Lb. (680 kg) Full Drum 800 Lb. (363 kg) Half-Full Drum * * Half-full rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum. morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc.
Open the catalog to page 5Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Dimensions of Model 905 < PILOT > Scale-Equipped Power-Propelled Drum Pourer with drum raised to maximum dispensing height Net Weight: 2270 Lb. (1030 kg) Capacity • 800 Lb. (363 kg) Full Drum • 500 Lb. ( kg) Half-Full Drum * * Half-full rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum. morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc.
Open the catalog to page 6Model # 900 & 905 Drum Pourers The Specialist In Drum Handling Equipment Dimensions of Model 905 < PILOT > Scale-Equipped Power-Propelled Drum Pourer with drum lowered to floor Net Weight: 2270 Lb. (1030 kg) Capacity • 800 Lb. (363 kg) Full Drum • 500 Lb. ( kg) Half-Full Drum * * Half-full rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum. morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc.
Open the catalog to page 7All Morse Mfg. Co. catalogs and technical brochures
-
Hydra-Lift Karriers
3 Pages
-
311 Series
2 Pages
-
310 Series
6 Pages
-
Tilt-To-Load Drum Tumblers
5 Pages
-
Hydra-Lift Drum Rollers
5 Pages
-
201 Series
6 Pages
-
1-5154 Series
5 Pages
-
611 and 620 Series
5 Pages
-
405 Series
6 Pages
-
195 Series
3 Pages
-
Models 185XGR & 185XMGR
3 Pages
-
305 Series Can Tumblers
3 Pages
-
Model 14 Round Drum Dolly
2 Pages
-
160 4-Wheel Drum Trucks
2 Pages
-
Drum Lifters 90
3 Pages
-
309 series
4 Pages