Hydra-Lift Drum Rollers
5Pages

CE Marked Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment CE Marked Hydra-Lift Drum Rollers include Controls and Enclosure with Safety Interlock • MADE IN USA Gently mix contents inside a sealed drum Easy to load upright drum at floor-level Ergonomic powered hydraulics tilt drum from upright over to rolling position Roll a drum on its side at 4 to 16 RPM Set timer to roll drum for up to 16 hours Roll a steel drum up to 102 cm (40”) tall, 15.25 to 66 cm (6” to 26”) in diameter Add Option # POLY-456 to roll a plastic drum Capacity: 454 kg (1000 Lb.) Liquid Load in drum Roll drum on its side to mix contents Maximum ambient operating temperature: 54oC (130oF) Remix settled ingredients, and integrate new components right inside a sealed drum. Nothing to insert into the drum. . . Eliminates transfer and clean-up. Use a separate drum for each batch. . . So no container to purge between batches. Morse CE Marked Hydra-Lift Drum Rollers with included Controls and Enclosure with Safety Interlock are fully tested and certified compliant with European machine directives. Load an upright drum at floor level. The drum roller is designed to roll your drum to thoroughly mix drum contents. Set the time of drum rotation anywhere from a few seconds to 16 hours. You adjust the rolling speed from 4 to 16 RPM. Load upright drum onto base plate Once mixing is complete, use the controls to return drum to upright position at floor-level for easy handling. The enclosure has an integrated safety interlock, in accordance with European directives, so the machine automatically shuts off when the door is opened. In case of any problem during operation, the Roller can be interrupted by pressing the red emergency stop. Power connections and motor controls must comply with applicable local codes. Tilt drum over to rolling position Magnet door closure CE Marked Drum Roller, Controls, Enclosure with Safety Interlock and Export Crate CE Marked Drum Roller, Controls, Enclosure with Safety Interlock and Export Crate Factory Installed Option to Roll a Plastic Drum Kit for customer to install to Roll Plastic Drum

CE Marked Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment 456 SPECIFICATION SHEET (CE Marked) Capacity: Liquid Load Drum Specs: Drum Diameter Drum Height Machine Height: Loading Position Rolling Position Machine Floor Space: Loading Position Rolling Position Enclosure Height: Enclosure Floor Space: Shipping Weight: AC Motor Specs for Model 456-1-50-CE AC Motor Specs for Model 456-3-50-CE morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

CE Marked Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Shown without Enclosure for Clarity ONLY Load and unload upright drum at floor level with a hand truck or crane MADE IN USA Load and unload drum with a drum truck such as Morse model 160 4-wheel drum truck shown here. Power drum tilt You control the built-in hydraulic system to take the upright drum to the horizontal position for rolling. Load with your hoist or crane equipped with a Below-the-Hook Drum Lifter. Morse model 92 shown. Control rolling speed of drum from 4 to 16 RPM Roll your 200 liter (55-gallon) drum...

CE Marked Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Control Station Push START button to activate power Use TILT handle to raise the drum into rotating position Set timer to Roll drum for desired time, from just a few seconds... up to 16 hours Use the ROLL handle to begin drum rotation Adjust drum rotation from 4 to 16 RPM morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

CE Marked Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Outside post-to-post Dimensions: L224 x W102 x H161 cm (L88” x W40” x H63.25”) Enclosure Kit Parts List Qty. Wire Mesh Panel Wire Mesh Panel Hinge Door Corner Post morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.