The Specialist In Drum Handling Equipment Verti-Karrier Below-Hook Drum Lifters Lift a Rimmed 55-Gallon Steel Drum with Your Crane Model 90-SS Grab and lift a 55-gallon (210 liter) steel drum by gripping under the top rim. Then move and place your drum almost anywhere. You only need to operate your hoist to guide drum grab into position. This saves operator time and protects against dangerous climbing. Lower Vert-Karrier onto the top of drum. Then, as the drum grab is elevated it automatically grips under the drum top rim. When the drum is lowered to the ground, the drum grab carriage drops down and automatically locks in the open position, releasing the load. The drum picker grip will not disconnect until drum is fully down. The Verti-Karrier is then ready to lift the next drum. Lower onto top of drum. The open grippers and cross plates help it settle on drum. Latch automatically shifts to activate drum grip. Move drum with hoist. Raise hoist to close the grippers and lift the drum. Grippers press equally on both sides of the drum. Requires Drum Top to be on and Secure Attach Verti-Karrier to hoist hook. Automatic latch keeps drum lifter grippers open until it settles on top of the drum. Load Drum in Hard-To-Reach Areas Alternating Grip and Release Mechanism 90 Series Verti-Karrier Operation Engages Under Top Rim of Steel Drum Lower hoist to place drum. The Verti-Karrier maintains tight grip until drum weight is fully down. It then releases the deposited drum and remains open to repeat the lifting cycle. Vert-Karrier Drum Lifters for STEEL Drum with Lid ON & SECURE Model # 90 90M 90-SS Spark Resistant Monel for 55-gallon (210 liter) drum T304 Stainless Steel for 55-gallon (210 liter) drum For 85-gal. (322 liter) steel overpack or salvage drum Load an upright drum onto a 456 Series Hydra-Lift Drum Roller

The Specialist In Drum Handling Equipment Verti-Karrier Below-Hook Drum Lifters Model 90-85 Verti-Karrier for 85-gallon (322 liter) steel overpack or salvage drum. Lift a drum with diameter from 25-15/16” to 26-7/16” (65.9 to 67.2 cm) Custom Model Custom model # 90S-HD Heavy-Duty Verti-Karrier for 2000 Lb. (907 kg) drum The greater capacity is achieved by manufacturing this drum lifter with larger, stronger materials. The arms are wider, the base and grip pads are thicker.

The Specialist In Drum Handling Equipment Verti-Karrier Below-Hook Drum Lifters Model 90, 90-SS and 90M Dimensions MADE IN USA 90 Series Verti-Karriers have 3 different settings, and should be adjusted to grip the sidewall under the rim of your drum. Model 90, 90-SS and 90M Middle hole (shown left) for 22-3/16” (56.4 cm) diameter Bottom hole for 22-7/16” (57 cm) diameter