611 and 620 Series
5Pages

MORStak Drum Rackers 611 and 620 Series TM The Specialist In Drum Handling Equipment Safety-Conscious Drum Racking The Problems • Hazards of moving drums on and off upper racks Handling drums where a forklift will not fit Lifting drums from upright to horizontal 620 Series Rack up to 8.5 feet (2.59 m) high Adequate rack space for drum storage Model 620-115 shown has Battery Powered Lift and Tilt Virtually Zero-Clearance Racking Capability! The Solution: The affordable MORStak Drum Rackers TM Stack drums side by side with virtually zero clearance Easily lift, move and rack a drum Compact base with 6 foot (183 cm) turning radius Rack your drums up to 8.5 feet (2.59 m) high! MORStak Drum Rackers TM With the MORStak Drum Racker you can easily and safely lift an upright drum from the floor, tilt it to horizontal, transport it, and set it into a drum rack up to 8.5 feet high. Then reverse the entire process to retrieve your drum from the rack. TM MORStak Drum Rackers replace expensive lift trucks. Eliminate hazardous “bare fork” handling of drums, upends and down-ends of drums, and they move in tighter spaces. MORStaks handle a drum with faucet and vent in place so the rack may serve as a multiple drum dispensing station. The most dense racking is possible because drums need not be separated. Lifting arms fit easily into the spaces below the curvature of the drum. This enables the most efficient use of storage space. Designed to handle 55-gallon (210 liters) steel or plastic drum with suitable top rim. Rugged two-stage frame of TM MORStak Drum Rackers provides lift range for a four tier drum rack with top shelf as high as 102” (259 cm). Single-stage TM MORStak Drum Rackers provide reach for a two tier drum rack with top shelf as high as 56” (142 cm). 1. Secure the clamp to grip your drum. Heavy duty hydraulic lift cylinders include a velocity fuse to provide a full line shut-off in the event of a line failure. Two easy-to-use valve handles control the power lift and tilt functions. A visual indicator informs the operator of the recommended height for tipping drums. Special features prevent tilting drum from horizontal until operator secures drum in place. Choices of Air, AC, or 12V DC powered lift and tilt are available. 2. Raise drum: Use MORStak drum rackers to lift an upright or horizontal drum from floor. service@morsedrum.com 3. Tilt drum to horizontal, then transport it to the desired location. (315) 437-8475 4. Release the clamp, then raise drum to place it on rack up to 8.5’ (2.59 m) high on a 4-tier rack. 103 Kuhn Rd. Syracuse, NY, 13208 USA

MORStak Drum Rackers 611 and 620 Series TM The Specialist In Drum Handling Equipment MORStak Drum Racker Model Numbers TM MORStak Drum Rackers TM Maximum Racking Height Power Source Base Dimensions Domestic Ship Weight Domestic Ship Dimensions * 12V DC battery powered hydraulics, includes battery and 50/60Hz charger. NOTE: 12V Deep Cycle Lead Acid Battery is designed for domestic shipment only. For export shipment, choose the following battery option: • Option “NB” No Battery. Customer must obtain battery before use... Exide # 27MDP 12V Deep Cycle Battery or equivalent. ** Air motor...

MORStak Drum Rackers 611 and 620 Series TM The Specialist In Drum Handling Equipment 620 Series Two-Stage Frame MORStaks Rack up to 8.5’ (2.59m) High TM Turning Radius: 68.25” (174 cm) Minimum overall height: • 80” (203 cm) with horizontal drum • 94.5” (240 cm) with upright drum Typical rack configuration served shown below Side View Front View

MORStak Drum Rackers 611 and 620 Series TM The Specialist In Drum Handling Equipment 611 Series Single Stage Frame MORStaks Rack up to 56” (142 cm) High TM Turning Radius: 61” (155 cm) Typical rack configuration served shown below Minimum overall height: 78” (198 cm) Side View Front View

MORStak Drum Rackers 611 and 620 Series TM The Specialist In Drum Handling Equipment Faucet Clearance Dimensions MORStak Drum Rackers will rack a drum in horizontal position with any of the following Morse Drum Faucets in place on drum: • Model 65-20 2” (5.1 cm) Molasses Gate Model 65-75 3/4” (1.9 cm) Molasses Gate Model 68-20 2” (5.1 cm) Poly Faucet Model 68-75 3/4” (1.9 cm) Poly Faucet