Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Built-in Hydraulics Lift Your Drum Mixing In Closed Drum Means Less Hazards • • Save time, labor and money by mixing inside a closed drum Remix settled ingredients, and integrate new components Ergonomic powered hydraulics tilt drum from upright into rolling position Eliminate transfer and clean-up • Use a separate drum for each batch No container to purge between batches Nothing to insert into drum Drums make economical mixing vessels Maximum ambient operating temp: 130o F (54o C) Load upright drum at floor level with drum truck or your crane Hydra-Lift Drum Rollers can eliminate spills, splashing of dangerous contents on workers, and risk of contamination. Mix inside closed shipping drums and have the machine do the work of loading and unloading itself! Load an upright drum into the Hydra-Lift Drum Roller. You control the hydraulic tilting action that places the drum down onto the rotator wheels. Then use a second control to start and stop the hydraulic motor that drives rotation. Minimize time, labor and extra equipment of getting drum into mixing position. • • Power drum tilt Load drum with your hoist or crane and a Below-the-Hook Drum Lifter, model 92 shown Vary drum rolling speed Capacity: 1000 Lb. (454 kg) liquid load, 400 Lb. (182 kg) dry load. A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load. Load drum onto Hydra-Lift Drum Roller with drum truck, model 160-WP shown... a simple way to load and remove drum Roll a 22.5” (57.2 cm) diameter drum from 5 to 20 RPM, or 4 to 16 RPM on 50Hz models. Roll a Drum: 6” to 26” (15.25 to 66 cm) in diameter, and with 40” (102 cm) maximum length Options Roll a Plastic Drum Option # POLY-456 Factory Installed option required to safely roll a plastic drum. Includes extra wheels to support flexible soft-sided plastic drum, and end stop to prevent drum from traveling length-ways. NOTE: This is NOT a drum roller by itself. It is an OPTION to install on a Morse Drum Roller. Kit for customer to install on Hydra-Lift Drum Roller Use the built-in hydraulic system to move an upright drum over to horizontal position for rolling. • Model # 456-1 Hydra-Lift Drum Roller Model # CP-456-1-115 Control Package (sold separately) Roll your 55-gallon (210 liter) drum from 5 to 20 RPM with the variable speed hydraulic drive. Note: 50Hz models can be adjusted from 4 to 16 RPM. Shown without Enclosure for clarity only morsedrum.com Bolt-on Idler Attachment to roll 1 to 5 gallon (3.8 to 18.9 liter) cylinder on Hydra-Lift Drum Roller. Spacers adjust for up to 18” (45.7 cm) tall pail. Roll 5-gallon can at approximately double RPM of a 55-gallon (210 liter) drum. Easily remove Idler to return to rolling a drum. (315) 437-8475

morsedrum.com Spec Sheet F456 The Specialist In Drum Handling Equipment Hydra-Lift Drum Rollers 456 Series

Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Control Packages Guard Enclosure Kits Hydra-Lift Drum Rollers Motor Style Motor Voltage Motor Information Air Controls are included with model 456-A *** 400 * ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. 5 to 20 60Hz Explosion proof ** NEMA 7/93control box to 1 575 456-E3-575 Explosion-proof Control Packages have no wiring from the the motor. Please consult an electrician to complete the wiring in accordance to your 5 to 20 Air Motor *** local 456-A code. * ONLY NON-Explosion Proof AC Control Packages...

The Specialist In Drum Handling Equipment Hydra-Lift Drum Rollers Control Packages (sold separately) Select the appropriate Control Package for each model, and your power supply. Use power controls to start and stop drum rolling. The control mast can be positioned outside the Safety Enclosure on either the left or right side, or at the back of Drum Roller. AC Control Package (sold separately) NEMA 4/12 for NON-Hazardous Areas Includes Control Box with: • Start and Stop Buttons Red Emergency Stop Button Lockable Main Disconnect to shut off and lock out power to the unit (sold separately) NEMA...

Hydra-Lift Drum Rollers The Specialist In Drum Handling Equipment Guard Enclosure Kits with Safety Interlock (sold separately) Comply with OSHA Requirements with a Morse Guard Enclosure Kit (Sold Separately) Guard Enclosures for Morse Hydra-Lift Drum Rollers have a safety interlock to automatically shut off the drum roller when the gate is opened. Open the enclosure gate, place your drum onto the drum roller, then close the gate to allow operation. Connections are included for air powered model only. Morse Control Packages (page 3) provide controls and connections for AC models. All Morse Control...