309 series
4Pages

{{requestButtons}}

Catalog excerpts

309 series - 1

Drum Tumblrs The Specialist In Drum Handling Equipment • Thorough “corner-over-corner” mixing action • Saves time, labor and money • Use a separate drum for each batch • No container to purge between batches • Common drums make economical vessels Model # 309-3 Drum Tumblr TM shown with Control Package Option # CP-309-3-230 (sold separetly) Model # 309-3 Drum Tumblr Model # 309-3 Drum Tumblr TM shown with Control Package Option # CP-309-3-230 (sold separetly) Tumble a Closed Plastic, Steel or Fiber Drum • Mix products inside a drum 29” to 37” (74 to 94 cm) tall 18” to 23.5” (46 to 60 cm) diameter Load an upright drum with your hoist or crane Secure your drum in holder with web strap and two top clamps Capacity: 800 Lb. (363 kg) Full Drum 400 Lb. (181 kg) Half-Full Drum Half-full Capacity is an indication of the capacity for tilting an unbalanced, bottomheavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. Mixing in a Closed Drum Means Less Hazards Enjoy the benefits of mixing inside closed shipping drums. Eliminate worker exposure to dangerous ingredients, spills and risk of contamination. Mix right inside a sealed drum with a Morse Drum TumblrTM. Open the hinged ratchet plate and two top clamps, then load a drum into the tumbler with model 92 Below-Hook Drum Lifter and your hoist or crane. Secure the drum in the tumbler using the web strap and ratchet around the drum, and tightening the two top clamps. Then turn the motor on to begin drum tumbling. Or with your forklift, model 284 Fork Hook, and model 92 Below-Hook Drum Lifter (inset). morsedrum.com

Open the catalog to page 1
309 series - 2

The Specialist In Drum Handling Equipment Control Packages (Sold Separately) Guard Enclosure Kits (Sold Separately) Morse Control Packages include the Control Mast and the appropriate Control Box for each model. Use power controls to start and stop drum tumbling. Positionthe control mast outside the safety enclosure on either the left or right side, or at the back of Drum Tumbler. Enclosures with Safety Interlock to Meet OSHA Requirements Control Mast and AC Control Box for Model 309-1 NEMA 4/12 for NON-Hazardous Areas Includes Control Mast and Control Box with: • Fixed Drum Rotation Speed...

Open the catalog to page 2
309 series - 3

The Specialist In Drum Handling Equipment Drum TumblrTM Model Numbers Model # Motor Style Motor Voltage Explosion proof ** Explosion proof ** Explosion proof ** Air Motor *** 14 RPM or Add Morse Control Package for Variable Speed 2 to 20 RPM Control Package Option # On/Off Air Valve, Filter, regulator, lubricator 14 14 Vary RPM with air flow & pressure Models for Countries with 50Hz Power Supply 309-E1-50 309-E3-50 Explosion proof ** Explosion proof ** Explosion Proof motor on model 309-E1-50 is rated for Class 1 Group D. Other Explosion Proof motors are rated for Class I Group D, and Class...

Open the catalog to page 3
309 series - 4

The Specialist In Drum Handling Equipment Website: morsedrum.com Copyright 2022 - Morse Mfg. Co., Inc.

Open the catalog to page 4

All Morse Mfg. Co. catalogs and technical brochures

  1. 311 Series

    2 Pages

  2. 310 Series

    6 Pages

  3. 201 Series

    6 Pages

  4. 405 Series

    6 Pages

  5. 195 Series

    3 Pages