Power Tilt Kontrol-Karriers The Specialist In Drum Handling Equipment Controlled Drum Pouring with Your Hoist or Crane Kontrol-Karriers with Power Drum Tilt Control • Quick, sure below hook drum handling by one person with your monorail, crane, or chain block Improve safety and productivity Efficient controlled high level pouring Capacity: 1500 Lb. (680 kg) full drum 800 Lb. (363 kg) half-full drum Unbalanced, bottom-heavy, partially full drum with shifting load AC powered models have 2-button pendant on 7 foot (2.1 m) cord. Air powered models have a 3-position control valve on a 6 foot (183 cm) hose. Air motor requires air supply at 20 psi at a rate of 22 scfm. is harder to tilt than a full drum. Morse power-tilt Kontrol-Karriers for below-hook applications provide controlled drum tilt of 360o in both directions. Fully invert drum in just 15 seconds. Manipulate drum tilt angle above your reach. All Morse below-hook drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to rated load markings and unit identification, minimum design safety factor of 3, based on yield strength, for load bearing structural components. Welding performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test. Drum Holders Web strap and ratchet drum holder is sized to handle your 22.5” (57 cm) diameter 55-gallon (210 liter) steel drum. Use web straps mechanisms to secure around the drum. Accepts options to handle various smaller diameter drums or a 55-gallon (210 liter) plastic drum (side 2). Models with 3-Piece Drum Holder secure drum with two hinged metal bands and toggle clamp. 3-Piece Drum Holder is sized for a 55-gallon (210 liter) 22.5” (57 cm) diameter steel drum. These models accept a Diameter Adapter 55/30-19GR for a 19” (48 cm) diameter 30-gallon (114 liter) steel drum. Steps to use Power Tilt Kontrol-Karrier 1. Attach your hoist hook to lifting point of Kontrol-Karrier and move to upright drum Mate Kontrol-Karrier’s drum holder to middle of drum and secure between drum ribs... No tools needed Lift drum and move to pouring station Use controls to turn drum 360o in either direction, even while hoisted above your reach Power Tilt Kontrol-Karriers Custom Stainless Steel Model Ship fully assembled packaged in wooden crate. Drum Holder Full Load Amp Draw AC Power-Tilt Kontrol-Karrier, 1/3 HP/1 phase/115V motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/1 phase/220V 50Hz motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/3 phase/230V motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/3 phase/460V motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/1 phase/115V motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/3 phase/230V motor AC Power-Tilt Kontrol-Karrier, 1/3 HP/3 phase/460V motor Air motor Power-Tilt Kontrol-Karrier Air Power Control, spark resistant parts Cinch Chain and Ratchet Air motor Power-Tilt Kontrol-Karrier Air Power Control, spark resistant parts

The Specialist In Drum Handling Equipment Power Tilt Kontrol-Karriers Options and Accessories Bracket Asembly Kit # 4556-P to Prevent Drum from Slipping Diameter Adapters for 195A Series ONLY Install the Bracket Assembly required to prevent a 55-gallon (210 liter) plastic drum from slipping. The Bracket is also recommended to more securely hold a fiber drum. Bracket adjusts for 31” to 37” (78.7 to 94 cm) tall drum. Insert correct size Diameter Adapter to handle a smaller drum. Simply lift the Diameter Adapter out of the drum holder to return to handling a 55-gallon (210 liter) drum. Diameter...

The Specialist In Drum Handling Equipment Power Tilt Kontrol-Karriers Dimensions