Group: Wabtec Corporation
Catalog excerpts
/// Socket, push-in terminals, panel mount Sockets for extreme reliability, within long endurance applications and harsh environments Panel / flush mount Very compact solution Sturdy push-in terminals Solid and stranded wires with ferrules can be inserted easily without using a tool Stranded wires without ferrules can be inserted with a flatbladed screwdriver Twin connection per relay contact Large wires up to 3.3 mm2 (AWG 12) High density matrix of relay/sockets possible, horizontal and vertical stacked Suitable for all railway and industry D- & D-U relay series Easy & quick installation (up to 75% reduction of wiring time) Positive mechanical keying Trifurcated female receiver for tight grip relay pin Clear terminal ID The V33 is a panel/flush mount relay socket. The V33 Connection diagram Top view (relay side) Bottom view (wiring side) socket has a base with two highly reliable push-in terminals per relay contact, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. Solid and stranded wires with ferrules can be inserted without using a tool or pressing a lever. Wires up to 3.3 mm2 can be inserted. This quick & easy wiring method saves up to 75% wiring time. Pinning on the socket complies with pinning on the relay. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed relays. Application The V33 relay socket is suitable for general railway and industry applications with a space saving design. Installation and replacement of relays is made easy and cost saving. No maintenance is required for the user. Suitable for all railway and industry D- & D-U relay series. Railway compliancy Industry compliancy Datasheet: V33 socket V3.3 November 2021
Open the catalog to page 1Technical specifications Contact rating Dielectric strength Protecting category IEC 60529 IP40 (with relay), back side IP20 Panel mounting 60 x 40 x 33 mm (depth is 25.5 mm from front of panel) Connection technology Push-in (stranded wire without ferrule: spring clamp) Insulated conductor Wires with insulation diameter max. 4.25 mm (D) and conductor diameter max. 2.05 mm (d) Insulated conductor with insulated ferule Solid conductor Fine-stranded conductor Fine-stranded conductor; with insulated ferrule Fine-stranded conductor; without insulated ferrule Wire stripping length Total number of...
Open the catalog to page 2Railway applications - Rolling stock - Electronic equipment Railway applications - Electronic equipment used on rolling stock Railway rolling stock - Fire behavior Railway applications - Fire protection on railway vehicles Part 2: Requirements for fire behavior of materials and components Railway rolling stock - On-off contact relays and fixed connections Railway applications - Rolling stock equipment - Shock and vibration tests Electromechanical control circuit devices and switching elements Electromechanical elementary relays EU directives on the use of certain hazardous substances in...
Open the catalog to page 3Socket V33 Tri-furcated female receiver for tight grip relay pin Example high density relay module with V33 sockets Datasheet: V33 socket V3.3 November 2021 backside (wiring side)
Open the catalog to page 4Mechanical keying relay and socket (optional) Function: • To prevent wrong installation • To prevent damage to equipment • To prevent unsafe situations Using keyed relays and sockets prevents a relay is inserted in a wrong socket. For example it prevents that a 24 VDC relay is put in a 110 VDC circuit. Positive discrimination is possible per different function, coil voltage, timing, monitoring, safety and non-safety. The D relay keying option provides 8 x 8 = 64 possibilities. Upon ordering the customer simply indicates the need for the optional keying. Mors Smitt will assign a code to the...
Open the catalog to page 5Installation and inspection Installation Before installation or working on the relay: disconnect the power supply first! (no hot swapping) Install socket and connect wiring according to the terminal identification. Plug relay into the socket ensuring there is no gap between the bottom of relay and the socket. Reverse installation into the socket is not possible due to the mechanical blocking snap-lock feature. No external retaining clip needed as the ‘snap-lock’ will hold the relay into the socket under all circumstances and mounting directions (according shock & vibration requirements IEC...
Open the catalog to page 6Socket V33 Ordering codes Remark: In Q4 2021 the V33 and V88 sockets are renewed and have new article numbers. For more information contact Mors Smitt. Article no. 338000670 Description Spring terminal relay socket 338001710 V88 Spring terminal relay socket for 8 contact relays 378690100 A104 Key receptacle (2 necessary per V33 socket) 560484013 A030 Retaining clip for D- & DU-relays series of 53 mm high* 560484014 A033 Retaining clip for D- & DU-relays series of 76 mm high* 560882058 Blanking plate V33 socket *Only necessary when regulations require as no external retaining clip needed as...
Open the catalog to page 7Over 10 million Mors Smitt relays in use in applications worldwide! Mors Smitt Asia Ltd. Unit B & C, 25/F., Casey Aberdeen House 38 Heung Yip Road, Wong Chuk Hang Hong Kong Tel: +852 2343 555 sales.msa@wabtec.com Mors Smitt France SAS 2 Rue de la Mandinière 72300 Sablé-sur-Sarthe, France Tel: +33 (0) 243 92 82 00 sales.msf@wabtec.com Mors Smitt UK Ltd. Graycar Business Park, Burton on Trent, DE13 8EN, UK Tel: +44 (0)1283 357 263 sales.msuk@wabtec.com Wabtec Netherlands B.V. Darwinstraat 10, 6718 XE Ede, Netherlands Tel: +31 (0)88 600 4500 sales.msbv@wabtec.com Mors Smitt Technologies Ltd....
Open the catalog to page 8All Mors Smitt BV catalogs and technical brochures
-
V88 Socket
9 Pages
-
Universal relays
12 Pages
-
Products & services
16 Pages
-
Signalling & rail infrastructure
20 Pages
-
Activities brochure
12 Pages
-
Relay Life Services brochure
8 Pages
-
Mors Smitt Group
19 Pages
-
Instruments 2
46 Pages
-
Instruments 1
74 Pages
-
Substation protection & control
12 Pages
-
SPD - Surge Protection Devices
60 Pages
-
brochure Railway activity
16 Pages
-
Protection components
20 Pages
-
Railway Technology
11 Pages
-
Brochure Mors Smitt Goup
13 Pages
-
Signalling relays BR930
11 Pages
-
Brochure Door control units
11 Pages
-
Brochure Protection components
11 Pages
-
Miniature circuit breakers
17 Pages
-
Mors Smitt Railway relays brochure
196 Pages
-
Engineered solutions
32 Pages
-
Mors Smitt Heavy Duty Relays
100 Pages
-
Mors Smitt Industrial Technology
24 Pages
-
Mors Smitt Products & Services
12 Pages