
Catalog excerpts

Mors Smitt Industrial Technology Industrial current & voltage sensors Hall effect current & voltage sensors
Open the catalog to page 1
Mors Smitt Industrial Technology Industrial sensors Industrial current & voltage sensors
Open the catalog to page 3
Closed loop current & voltage sensors meeting major standards
Open the catalog to page 4
Mors Smitt Industrial Technology Mors Smitt has extended its product portfolio focusing on market sectors like power generation, transmission and distribution, factory automation, petro-chemical, water treatment plants and general industrial requirements. Industrial sensors Today, more and more applications that used to be mechanical are changing to fully electronic control offering increased reliability, improved regulation standards and higher energy efficiency. For motors with inverter control total energy consumed savings of up to 50% are achievable. The inverter control requires...
Open the catalog to page 5
Industrial sensors With over 25 years experience in measurement for railway equipment, Mors Smitt introduces a new range of sensors based on closed loop technology, to supply the industry market. These sensors allow measurement of all current waveforms, with high galvanic insulation between the primary and secondary circuits. Closed loop sensors The probe placed in the air gap of the magnetic circuit, provides a voltage proportional to this flux. The electronic circuit amplifies the signal from the primary current Ip or voltage Up flowing across the sensor and generates a current into the...
Open the catalog to page 6
Molex output connector for MSA sensors M5 output connectors for MSV sensors High galvanic isolation Dielectric strength of 3.8 kV...6 kV - 50 Hz -1 min Measuring of all waveforms DC, AC, impulse currents Excellent accuracy, immunity and response time From ± 1.5 % to ± 0.5 % at rated current over -40 °C...+85 °C with linearity < 0.1 %, and over a large frequency from DC to AC and impulse waveforms. Response time <1 µs Form fit function The sensors can be mounted vertically or horizontally and provide form fit functions with other sensors EMC compliant All sensors include EMC compliancy...
Open the catalog to page 7
Motor and renewable energy inverters Typical applications: • Machine tools, printing, paper, textile, plastic • Steel mills • Lifts • Cranes • Robotics • Pumps • Energy inverters for all kind of renewable energies (wind, sun, hydrogen, ocean currents, energy storage etc. Uninterruptible power supplies 3~ 3~ Typical applications: • EDP systems • Telecom • Security systems
Open the catalog to page 8
Power supplies for welding applications AC I DC 1~ 3~ Input rectifier Output rectifier Typical applications: • Test & measurement in laboratories & universities • Medical X ray and imaging equipment • Electrolysis, currents monitoring • Inductive heating • Energy management systems, monitoring of load currents • Overcurrent protection • Control and safety systems • Electrical traction Battery supplied applications 1~ 3~ Typical applications: • Electric vehicles (zero emission vehicles) • Forklift trucks • Wheel chairs • Solar power supplies
Open the catalog to page 9
Selection guide Current sensors Secondary nominal RMS current (Isn) Overall acuracy Operating temperature Storage temperature Primary nominal RMS current (lpn) Primary current measuring range Output measuring resistance (Rm) 70 oC Auxiliary supply (VC) Current consumption (Ic) Linearity Offset current at lp = 0 - TA=25 oC Response time @ 90% of lpn and di/dt 100 A / µs Secondary coil resistance @ 70 oC Weight Molex connector1 Horizontal / vertical / chassis 5 year warranty 1 other conversion ratio, dielectric, outputs on request
Open the catalog to page 10
Voltage sensors MSV 100 Primary nominal RMS voltage (lpn) Primary current measuring range Output measuring resistance (Rm) 25 oC Secondary nominal RMS current (Isn) Conversion ratio1 Overall acuracy Operating temperature Storage temperature Auxiliary supply (VC) Current consumption (Ic) Linearity Offset current at lp = 0 - TA=25 oC Response time @ 90% of lpn and di/dt 100 A / µs Secondary coil resistance @ 70 oC Weight Molex connector1 Horizontal / vertical / chassis 5 year warranty 1 other conversion ratio, dielectric, outputs on request
Open the catalog to page 11
Current senors General data • • • The housing and insulation resin (UL94 V0) are self-extinguishable upon fire Mounting holes are provided in the housing mold for two positions on a base or flat mount through a plate Direction of current: a primary current flowing in the direction of the top arrow on the sensor generates a positive secondary output current on terminal M Primary connection • • Hole for primary conductor The temperature of the primary conductor in contact with the housing shall not exceed 100 °C Secondary connection • • Molex HE14 type connector Other output on request Wiring...
Open the catalog to page 12
Mechanical mounting • • • Any mounting position is possible Recommended fixing: by screws and flat washers The busbar (or cable) must be centred Precautions in electromagnetic environment Due to their principle of operation (measure of magnetic field by the Hall effect probe), closed loop hall effect current sensors can be sensitive to strong magnetic fields. It is recommended to avoid positioning them to close to high current power cables. Processing of the sensor output signal Standard codes of practice advise that, before the signal is processed, a low-pass filter adapted to the...
Open the catalog to page 13
Current sensors 300 A , closed loop Industrial applications, current measuring of all waveforms AC, DC • • • • • • • Chassis mount Closed loop High dielectric strength Precise linearity Precise accuracy High dynamic response No foucault losses in the magnetic circuit Electrical characteristics Primary nominal RMS voltage Primary voltage measuring range Output measuring resistance Secondary nominal RMS curent Conversion ratio Auxiliary supply voltage Current consumption Dielectric strength between: primary and secondary circuit Electrical characteristics Overall accuracy @ IPN - TA= 25 °C...
Open the catalog to page 14All Mors Smitt BV catalogs and technical brochures
-
EazyPV+
1 Pages
-
Instaltest XB
1 Pages
-
KDN-R8
14 Pages
-
TRD8
12 Pages
-
V88 Socket
9 Pages
-
V33
8 Pages
-
Universal relays
12 Pages
-
Products & services
16 Pages
-
Signalling & rail infrastructure
20 Pages
-
Activities brochure
12 Pages
-
Relay Life Services brochure
8 Pages
-
Mors Smitt Group
19 Pages
-
Instruments 2
46 Pages
-
Instruments 1
74 Pages
-
Substation protection & control
12 Pages
-
SPD - Surge Protection Devices
60 Pages
-
brochure Railway activity
16 Pages
-
Protection components
20 Pages
-
Railway Technology
11 Pages
-
Brochure Mors Smitt Goup
13 Pages
-
Signalling relays BR930
11 Pages
-
Brochure Door control units
11 Pages
-
Brochure Protection components
11 Pages
-
Miniature circuit breakers
17 Pages
-
Mors Smitt Railway relays brochure
196 Pages
-
Engineered solutions
32 Pages
-
Mors Smitt Heavy Duty Relays
100 Pages
-
Mors Smitt Industrial Technology
24 Pages
-
Mors Smitt Products & Services
12 Pages