Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
VRB_YMD-10WR3

VRB_YMD-10WR3
5Pages

Catalog excerpts

10W,wide input isolated & regulated single output ,DIP packaging, DC-DC converterProtection RoHS FEATURES • Wide input voltage range (2:1) • High efficiency up to 88% • No-load power consumption as low as 0.12W • Isolation voltage : 1.5K VDC • Input under-voltage protection, output short circuit, over-current, over-voltage protection • Operating temperature range: -40C to +85C • Meet CISPR22/EN55022 CLASS A, without external components • Reverse voltage protection available with A2S(Chassis mounting) or A4S(35mm DIN-Rail mounting) • International standard pin-out • EN60950 approval VRB_ YMD- 0WR3 series are isolated iOW DC-DC products with 2:1 input voltage. They feature efficiency up to 88%, 1500VDC isolation, operating temperature of -40 °C to +85 °C, input under-voltage protection, output over-voltage, over-current, short circuit protection and EMI meets CISPR22/EN55022 CLASS A, which make them widely applied in industrial control, electric power, instruments and communication fields. And extension package A2S andA4S also enable them with reverse voltage protection. Notes: ©Part No. with suffix of "A2S" means chassis mounting and suffix of "A4S" means DIN-Rail mounting (e.g. VRB2405YMD-10WR3A2S means chassis mounting; VRB2405YMD-10WR3A4S means DIN-Rail mounting); ®A2S (wiring) and A4S (rail) Model due to input reverse polarity protection function, input voltage range the minimum value and starting voltage is higher than 1VDC DIP package; ©Absolute maximum rating without damage on the converter, but it isn't recommended; ©Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum efficiency greater than Min.-2 is qualified. Input Specifications Item MORNSUN GUANGZHOU 5CIGNCG & TGCHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpre

Open the catalog to page 1

DC/DC ConverterVRB_YMD-10WR3 SeriesOutput Specifications Note: ®0%-5% load ripple&Noise is no more than 5%Vo.Ripple and noise are measured by "parallel cable" method, please see DC-DC Converter Application Notes for specific operation. Short circuit Protection Continuous, self-recovery MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC Converter VRB_YMD-10WR3 Series Product Characteristic Curve Tempe rat ure Derat ing Cur ve Design Reference 1. Typical application All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. Parameter description: Model Choose according to actual input...

Open the catalog to page 3

THIRD ANGLE PROJECTION Note: Unit :mm[inch] Pin diameter tolerances :±0.10[±0.004] General tolerances:±0.50[±0.020] MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 4

DC/DC ConverterVRB_YMD-10WR3 Series Note: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.Packing bag number: 58210003 (DIP),58220022(A2S/A4S package); 2. The maximum capacitive load offered were tested at input voltage range and full load; 3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and rated output load; 4. All index testing methods in this datasheet are based on Company's corporate standards; 5. We can provide...

Open the catalog to page 5