DC/DC ConverterURE_LP-10WR3 & URF_LP-10WR3 Series10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converterCB Patent Protection RoHS FEATURES • Ultra wide input voltage range (4:1) • High efficiency up to 87% • No-load power consumption as low as 0.12W • Isolation voltage : 3K VDC • Input under-voltage protection, output short circuit, over-current, over-voltage, over-temperature protection • Operating temperature range: -40°C to +85°C • Meet CISPR22/EN55022 CLASS A, without external components • Reverse voltage protection available with A2S(Chassis mounting) or A4S(35mm DIN-Rail mounting) • IEC60950, UL60950, EN60950 approval • International standard pin-out URE_LP-T0WR3 & URF_LP-T0WR3 series are isolated i0WDC-DCproducts with 41 input voltage. They feature efficiency up to 87%, 3000VDC isolation, operating temperature of-40°C to +85 V, Input under-voltage protection, output short circuit protection, over-voltage protection, over-current protection and EMI meets CISPR22/EN55022 CLASS A, which make them widely applied in industrial control, electric power, instruments and communication fields. And extension package A2S and A4S also enable them with reverse voltage protection. Notes: ©Part No. with suffix of "A2S" means chassis mounting and suffix of "A4S" means DIN-Rail mounting (e.g. URF2405LP-10WR3A2S means chassis mounting; URF2405LP-10WR3A4S means DIN-Rail mounting); ®A2S (wiring) and A4S (rail) Model due to input reverse polarity protection function, input voltage range the minimum value and starting voltage is higher than 1VDC DIP package; ©Absolute maximum rating without damage on the converter, but it isn't recommended; ©Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum efficiency greater than Min.-2 is qualified; ©The capacitive loads of positive and negative outputs are identical. MORNSUN GUANGZHOU 5CIGNCG & TGCHNOLOGY CO.,LTD. 2016.11.14-B/0 Page 1 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of f

MORNSUN” Input Specifications Output Specifications Note: ®At 0% - 5% load, the Max. output voltage accuracy of ±5VDCoutput converter is ±5%; ©When testing from 0% -100%load working conditions, load regulation index of ±5%; ©0% - 5% load ripple&Noise is no more than 5%Vo.Ripple and noise are measured by "parallel cable" method, please see DC-DC Converter Application Notes for specific operation. General Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

DC/DC ConverterURE_LP-10WR3 & URF_LP-10WR3 Series Storage Humidity Temperature Derating Curve Safe Operating Area Operating Temperature(°C) MORNSUN GUANGZHOU 5CIGNCG & TGCHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

DC/DC ConverterURE_LP-10WR3 & URF_LP-10WR3 Series Design Reference 1. Typical application All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. 3. It is not allowed to connect modules output in parallel to enlarge the power 4. For more information please find DC-DC...

DC/DC Converter URE_LP-10WR3 & URF_LP-10WR3 Series URE LP-10WR3A2S & URF LP-10WR3A2S Dimensions MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. 2016.11.14-B/0 Page 5 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

THIRD ANGLE PROJECTION Front View Unit: mm[inch] Note: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.Packing bag number: 58210039(DIP), 58220022(A2S/A4S package); 2. The recommended unbalance degree of the dual output module load is =S±5%; if the degree exceeds ±5%, than the product performance cannot be guaranteed to comply with all parameters in the datasheet. Please contact our technicians directly for specific information; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless...