Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
URB1D_XD-10W

URB1D_XD-10W
5Pages

Catalog excerpts

DC/DC ConverterURB1D_XD-10W Series 10W, ultra wide input isolated & regulated single output DC-DC converter Patent Protection RoHS FEATURES • Wide range of input voltage (4:1) • Efficiency up to 86% • Isolation voltage : 1.5K VDC • Operating temperature range: -40C to +85C • Output over-voltage protection, Short circuit protection • Low ripple & noise • A2S (wring mounting) and A4S (35mm rail mounting) products featuring anti-reverse connection for input • Meet EN60950, EN50155 • International standard pin-out URB1D_XD-WWseries are isolated WWDC-DCproducts with 4:1 input voltage .they feature efficiency up to 86%, 1'500VDC isolation, operating temperature of -40 C ~+85’C , output over-voltage protection, short-circuit protection, it offers good EMC performance, meet EN60950and EN50155standards. At modes are particularly suited to railway etc. c. And extension package A2S and A4S as enable them with reverse voltage protection. Note: ©series with suffix "A2S" are chassis mounting, with suffix "A4S" are DIN-Rail mounting, for example URB1D05XD-10WA2S is chassis mounting , URB1D05XD-10WA4S is DIN-Rail mounting; ©Absolute maximum rating without damage on the converter, but it isn't recommended; ©The efficiency of "A2S" and "A4S" is approx. 2% lower for the protection of inverse polarity. Input Specifications Item Output Specifications MORNSUN GUANGZHOU 5CIGNCG & TGCHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC ConverterURB1D XD- 10W Series 1 General Specifications 1 Temperature Derating Curve Safe Operating Area Operating Temperature('C) MORNSUN GUANGZHOU SCIGNCG & TGCHNOLOGY CO.,LTD. MORNSUN Guangzhou Science 8c Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC Converter URB1D_XD-10W Series Design Reference 1. Typical application All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery. If a further decrease of the input and output ripple is required, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance，and ensure the capacitance should be lower than the max. capacitive load of the product. Fig. 3 FC-C01D is the EMC auxiliary component of our company. Input voltage range: 40V-160V; FUSE: Choose according to...

Open the catalog to page 3

DC/DC Converter URB1D_XD-10W Series Dimensions and Recommended Layout MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 4

THIRD ANGLE PROJECTION Front View 1. Packing Information please refer to 'Product Packing Information'. The Packing bag number of Horizontal package : 58200035, the Packing bag number of A2S/A4S package:58220022; 2. Recommend to use module with more than 5% load, if not, the ripple of the product may exceeds the specification, but does not affect the reliability of the product; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C,...

Open the catalog to page 5