DC/DC Converter URB1D_XD-10W Series 10W, ultra wide input isolated & regulated single output DC-DC converter Wide range of input voltage (4:1) Efficiency up to 86% Isolation voltage :1.5K VDC Operating temperature range: -40℃ to +85℃ Output over-voltage protection, Short circuit protection Low ripple & noise A2S (wring mounting) and A4S (35mm rail mounting) products featuring anti-reverse connection for input Meet EN60950, EN50155 International standard pin-out Patent Protection RoHS URB1D_XD-10W series are isolated 10W DC-DC products with 4:1 input voltage .They feature efficiency up to 86%, 1500VDC isolation, operating temperature of -40℃ ~+85℃ , output over-voltage protection，short-circuit protection. It offers good EMC performance, meet EN60950 and EN50155 standards. All models are particularly suited to railway etc.c. And extension package A2S and A4S also enable them with reverse voltage protection. Selection Guide Input Voltage (VDC) Nominal Max.② (Range) Output Output Voltage Output Current (mA) (Max./Min.) (VDC) 5 2000/100 Efficiency (%,Min./Typ.) @ Full Load Note: ①series with suffix "A2S" are chassis mounting, with suffix "A4S" are DIN-Rail mounting, for example URB1D05XD-10WA2S is chassis mounting , URB1D05XD-10WA4S is DIN-Rail mounting; ②Absolute maximum rating without damage on the converter, but it isn't recommended; ③The efficiency of "A2S" and "A4S" is approx. 2% lower for the protection of inverse polarity. Input Specifications Item Input Current (full load / no-load) Operating Conditions Reflected Ripple Current Input impulse Voltage (1sec. max.) Starting Voltage Input Filter Output Specifications Item Operating Conditions Output Voltage Accuracy Line Regulation Full load, the input voltage is from low voltage to high voltage Load Regulation Transient Recovery Time Transient Response Deviation 25% load step change Temperature Coefficient Full load Over-voltage Protection Short circuit Protection Input voltage range Note: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods. MORNSUN Guangzhou Science & Technology Co., Ltd.

DC/DC Converter URB1D_XD-10W Series General Specifications Item Operating Conditions Insulation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA. Insulation Resistance Input-output, insulation voltage 500VDC Isolation Capacitance Operating Temperature Derating when operating temperature up to 71℃, (see Fig.1) Storage Temperature Storage Humidity Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds. 5-150Hz, Displacement range: 7.5mm, Acceleration: 2G Vibration Switching Frequency Physical Specifications Casing Material...

DC/DC Converter Efficiency Vs Input Vorrage(Full Load) Input Voltage(V) Efficiency Vs Output Load(Vin=l 10V) Output Current Percentage^) Design Reference All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery, If a further decrease of the input and output ripple is reguired, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low eguivalent impedance, and ensure the capacitance should be lower than the max. capacitive load of the FC-C01D is the EMC auxiliary component of our company. Input...

DC/DC Converter Dimensions and Recommended Layout Front View —Bottonji Viow- Unit :mm[inch] MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretati

DC/DC Converter THIRD ANGLE PROJECTION Front View 1. Packing Information please refer to 'Product Packing Information'. The Packing bag number of Horizontal package : 58200035, the 2. Recommend to use module with more than 5% load, if not, the ripple of the product may exceeds the specification, but does not affect the reliability of the product; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage...