TxxxxP Series MORNSUN® Active high precision signal conditioning modules FEATURES • Four-port isolation (signal input, signal output, power input and isolation power output are mutually isolated) • High accuracy (0.1% F.S.) • Isolation voltage: 2.5KVDC/60s • Low temperature coefficient (50PPM/'C, within -40C ~ +85C) PART NUMBER SYSTEM xxxxP Package Isolation power output Power supply Signal Output Signal Input Isolation Amplifier • Industrial grade operating temperature: -40C ~ +85 C • Low ripple & noise: <30mVp-p • ESD protection (IEC/EN61000-4-2 Contact ±4KV perf. Criteria B) TxxxxP Series signal conditioning modules (also called isolated transmitter,) are the analog signal isolated modules with preceding current/voltage signal input and post current/voltage signal output. With an embedded high-efficient micro-power supply, the product supplies power to the internal signal processing circuit and inputs a line of isolated power to the preceding-stage transducer at the same time. The electromagnetism isolated technology of the product features that the input, output, power supply, power distribution are isolated from each other, which can completely replace the traditional linear opfocoup/er isolation, also, it has superior temperature-coefficient characteristics, linearity and precision. TxxxxP Series are widely applied in PLC, DCS, MCU and other signal isolation & conversion. Selection Guide MORNSUN GUANGZHOU SCIGNCG & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Signal conditioning modulesTxxxxP Series T5550P

Signal conditioning modulesTxxxxP Series General Specifications 1. Please read the instructions carefully before use; contact our technical directly if you have any problem. 2. Do not use the product in hazardous areas. 3. use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismantle and assemble the product without permission to avoid failure or malfunction of equipment. 5. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75% with power input nominal voltage and rated signal output full load. After-sales...

2. EMC solution-recommended circuit ® In case of positive and negative isolation power output, Pin 13 is isolation power output negative, Pin 14 is isolation power output positive, Pin 15 Reference ground. ® In case of single isolation power output, Pin 13 is isolation power output negative, Pin 14 is isolation power output positive, Pin is 15 NC.NO need to use TVS4 and TVS6. 3. For more information please find the application notes on www.mornsun-power.comDimensions and Recommended Layout MORNSUN MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. 2016.05.17-B/0 Page 4 of 6MORNSUN Guangzhou Science...

TxxxxP Series MORNSUN* Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58210008; 2. All index testing methods in this datasheet are based on our Company's corporate standards; 3. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model products may exceed the requirements mentioned above. Please contact our technicians directly for specific information; 4. We can provide product customization service; 5. Specification^are subject...

Signal conditioning modulesTxxxxP Series Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected] MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation