Exhibit with us

{{>currencyLabel}}
- Back

English
- Back
- Français
- Español
- Italiano
- Deutsch
- 中文
- 日本語
- português
- Русский

Your most recent searches Delete

Frequent searches

Suggestions

Other sections

Search {0} in Catalogues Search {0} in Projects Search {0} in News & Trends

Brands containing {0}

Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
TxxxxHL

TxxxxHL
6Pages

Add to favorites

TxxxxHL

{{requestButtons}}

Catalog excerpts

TxxxxHL Series Two-wire Self-Powered signal conditioning module with HART Packac SupplylHART protocol Distribution voltage Distribution current Input signal Input signal type Isolation Amplifier FEATURES • Convert voltage to current and offer isolated power output • Self-powered, no external supply required • High accuracy (0.1 % F.S.) • High linearity (0.1% F.S.) • High isolation voltage(2KVAC/lmA/60s) • Small size: SIP9 (26*9.5* 12.5mm) • Extremely low temperature drift:50ppm/°C • Operating temperature range: -40°C ~ +85°C • HART compatible TxxxxHL is a specific with HART smart field instruments launched signal conditioning modules. The iso/afion module is designed for transmitting the input voltage signal to the output isolation current that the value is a standard3.7~22mA through output loop-powered, the module can offer a isolation micro-power for the pre-de vices. The module also has an integrated HART signal channel, according to the recommended solutions, it can realize the Half duplex communication of The field and control area, which greatly reduce the wiring cost between the field and the control area. The module adopts unique electromagnetic isolation mode and high performance level after. The module achieves the function of transmitting voltage signal to a 3.7~22mA standard signal isolation accurately conversion, which be used in a variety of instruments analog input port (such as PLC, DCS systems, etc.) to match, in addition, this module has extremely small form factor (SiP9) and excellent temperature drift characteristics (at -40 V - +85 "C operating temperature range drift is less than 50PPM/ ’C), this module can bear 2KVAC isolation voltage between the input and output. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

Signal conditioning module TxxxxHL Series MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

Signal conditioning module TxxxxHL Series 1 Note: ○The all test results is typical curves, and tested under the 4mA loop current; ○Forward：Two-wire loop to device direction; Reverse: Device to Two-wire loop direction. 2 Application Precautions 1. Please read the instructions carefully before use; contact our technical directly if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment....

Open the catalog to page 3

Signal conditioning module TxxxxHL Series Description Fig.2 shows a typical application of the Signal conditioning module TxxxxHL. MCU system, HART modem IC AD5700 and the signal conditioning module TxxxxHL work together for the communication between smart field devices and control systems . The transmission of analog signal As Fig.2, the signal conditioning module taking energy from the output current Loop to supply its internal dissipation, at the same time, it could provide one isolated power Vo+, for the MCU system and the other smart field devices. The Analog signal comes from sensor,...

Open the catalog to page 4

Signal conditioning moduleTxxxxHL Series Description Figure HART host communication signal amplification circuit, is designed to solve the problem of HART signal attenuation in long cable transmission application. The analog signal conversion: the use of a 250 Q resistor current signal into a voltage signal.TVS tube protection port, recommend using 12V or 15V TVS. HART receives the signal filtering, amplification and limiting: HART current signal in the 250 Q resistor is converted to voltage signal, Through low pass filter, the filter cut-off frequency is about 2.5KHz, Filter the high...

Open the catalog to page 5

Signal conditioning moduleTxxxxHL Series Notes: 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58240002; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company's corporate standards; 4. The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model products will exceed the above-mentioned...

Open the catalog to page 6

All MORNSUN Guangzhou Science & Technology Co. catalogs and technical brochures

Archived catalogs

Remove all

Compare up to 10 products