*mydirectindustry

TRxxxPW
1 /4Pages

Catalog excerpts

Isolator TRxxxPW series MORNSUN® ultra-thin Programmable thermal resistance isolators FEATURES • 3-port electrical isolation between input, output and power supply • 12.5mm slim case • High accuracy (0.1% F.S.) • High linearity (0.1% F.S.) • Low temperature drift(50PPM/°C) • Mini USB port communication • Low-power dissipation • Good EMC performance • Input / Output range programmable • High reliability(MTBF>500,000 h) TRxxxPW series thermal resistance isolator which are mainly applied in industrial automation systems can isolated convert thermal resistance input signal of the industrial Held instruments to the matched analog output signal for the DCS/PLC, realizing the acquisiton and transmission of field signal. An independent power supply is needed for the product and the port of power supply, input and output are isolated from each other. This series of products contain combinctions of 1 input 1 output, 1 input 2 output, 2 input 2 output and so on. The thickness of 12.5mm meet the need for high density field instdlciton. Connection of field devces and the regions: 2-wire, 3-wire thermal resistance MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

Isolator TRxxxPW series 1. Please read the instructions carefully before use; contact our technical support if you have any problem; 2. Do not use the product in hazardous areas; 3. Use DC power supply for the product. and 220V AC power supply is prohibited; 4. Do not disassemble or assemble the product without permission to avoid explosion protection failure or malfunction of product. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

TRxxxPW series Design Reference 1. Wiring diagram for product application Description (double input double output) L2B Signal 2 input line B Signal 2 input line C Signal 1 input line C Signal 1 input line B Signal 2 input line A Signal 1 input line A Bottom power supply port Inside Outside Inside Outside power input- Power+ power input+ Note: When use bottom power supply, anyone group or both is OK. Field Area Control Area Input Input channel channel + 6 6 Output channel + Vo RL Voltage source output Current source output Control Area Field Area channel 1 channel 1 + 6 6 channel 2 RL + + 10 -...

Open the catalog to page 3

TRxxxPW series ① Use dismountable terminals for instrument wiring, easy to operate; ② The sectional area of conductor is 0.5mm2-2.5 mm2; ③The length of conductor exposed is 8mm and is fastened by M3 bolts. 2. For more information please find the application notes on www.mornsun-power.com Installation & disassembly Installation DIN35mm standard rail installation 1. Insert the top of the instrument card in the rail; 2. Push the bottom of the instrument into the rail. 1. Insert to the clamp on the lower end of instrument with a screw driver (tool edge width≤6mm); 2. Push the screw driver up, and...

Open the catalog to page 4