Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
TRxxxPW-EX

TRxxxPW-EX
5Pages

Catalog excerpts

TRxxxPW-EX series ultra-thin programmable thermal resistance isolated safety barrier FEATURES • Input, output and power supply isolated from each other • 12.5mm slim case • High accuracy (0.1% FS.) • High linearity (0.1% FS.) • low temperature drift (50PPM/°C) • Mini USB port communication • Low-power dissipation • Good EMC performance • Programmable input/output • High reliability (MTBF>500,000h) The signal generated by the two-wire or three-wire RTDs in the hazardous area is picked up by this product, and converted to the standard analog current or voltage signal which is isolated with hazardous Held. While limiting the energy of intrinsically safe end siring into hazardous area, to ensure that the system is intrinsically safe expiosion-proofperformance. The product has a IMini USB interface, it can be used forprogramming to configure the type and range of input and output signals, An independent power supply is needed for the product lator with isolation power output you need, and the port of power supply, input and output are isolated from each other. The thickness is 1'2,5mm. Connecton of Held devices and the regions: 2-wire, 3-wire RTDs. zone 0zone Izone 2; IIA,IIB,IIC,T4~T6 hazardous area. MORNSUN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

TRxxxPW-EX series MORNSUN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

TRxxxPW-EX series Application Precautions 1. Please read the instructions carefully before use; contact our technical support if you have any problem; 2. Do not use the product in hazardous areas; 3. Use DC power supply for the product. and 220V AC power supply is prohibited; 4. Do not disassemble or assemble the product without permission to avoid explosion protection failure or malfunction of product. Design Reference 1. Wiring diagram for product application Bottom power supply port Output Output channel 1 channel 1 RL Current source Voltage source Loop supply power ® Use dismountable...

Open the catalog to page 3

TRxxxPW-EX series 2. Application in the intrinsically safe explosion protection system In the intrinsically safe explosion protection system, the isolated safety barrier belongs to related equipment and is installed in a safe location for connecting the intrinsically safe equipment in hazardous location and non-intrinsically safe equipment in safe location, which is capable of limiting the energy entering into the site in safe value, so as to ensure the safety of site equipment, personnel and production. The selection principles for the safety barrier in the intrinsically safe explosion...

Open the catalog to page 4

TRxxxPW-EX series 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58040010; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company's corporate standards; 4. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact...

Open the catalog to page 5