Isolated Module TRPxxxxxP RTD detection type isolated module MORNSUN® FEATURES • Two-wire, three-wire or four- wire Pt100 RTD signal input • High accuracy (0.2% F.S.) • High linearity (0.2% F.S.) • Isolation voltage (2.0KVAC/60s) • Low ripple & noise: ^30mVp-p • Extremely low temperature coefficient (50PPM/°C, within -40 to +85 C .Typ.) • Operating temperature range: -40C to +85C • Low cost, Compact size, Convenient to use, High reliability • Standard DIP24(31.6*20.3* 10.2mm), UL94-V0 Package • EN60950 approval TRP Series temperature signal isolation module is a hybrid integrated circuit, it is the RTD signal by the level of isolation of temperature convertedinto a standard linear with temperature signal. The circuit on the same chip integrates a set of multi-channel high isolated DC / DC power supply. Several high-performance signaiisoiators, and RTD linearization, long-term compensation, interference suppression circuit. Especially suitable for Pti00 RTD signaiisoiation convertedinto a standard signal isolation. Temperature signals transmission and remote without distortion. Temperature signal acquisition andisoiated of DCS system orindustriai site PLC. Chip integrates a high-efficiency DC-DC, it can produce two groups were separated from each other to the internal power amplifier inputs, modulation circuit supply and Outputs of the demodulator circuit. Switching circuit, and filter circuit. SMD technology structure and new isolation technologies allow the device to achieve: power, signal input and signal output2000VAC Three-terminal isolation. The product can meet the harsh operating environment requirements. Such as industrial grade temperature, humidity and vibration environment. TRP Series temperature signaiisoiation module very convenient to use, with minimal external components to achieve Pti00 RTD signal isolation transmitter, it can a/so achieve industrial ste temperature control signal of i input 2 output and i input 4 output functions. MORNSUN GUANGZHOU SCIGNCG & TECHNOLOGY CO.,LTD. 2016.12.22-A/4 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Isolated Module TRPxxxxxP MORNSUN* Transmission Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. 2016.12.22-A/4 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Isolated Module TRPxxxxxP 系列产品 Application Precautions 1. 2. 3. 4. Please read the instructions carefully before use; contact our technical support if you have any problem. Do not use the product in hazardous areas. Use DC power supply for the product and 220V AC power supply is prohibited. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact...

Isolated Module TRPxxxxxP MORNSUN® Notes: NC: Pin to be isolated from circuitry 3. Product calibration Calibration Equipment: the 0.01 accuracy resistance box, The DC power, Four and a half multimeter. Calibration steps: 1) Accordance with the application diagram to wiring, or install the product into the circuit board which has been designed. 2) According to the value of the auxiliary power supply, connect the power, Install adjustment potentiometer; the output of product is connected with the multimeter. 3) According to the temperature range of input to query the indexing table corresponding...

Isolated Module TRPxxxxxP MORNSUN*Dimensions and Recommended Layout Front View Unit :mm[inch] THIRD ANGLE PROJECTION- Pin-Out Function Amplitude Adjustment 1 Amplitude Adjustment 2 Power Supply( Power Supply(-) Voltage Signal Output (-) Voltage Signal Output (-) Current Signal Output ( Current Signal Output ( Thermal Resistance Signal Input B Thermal Resistance Signal Input B Thermal Resistance Signal Input A Pin to be isolated from circuit 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58210008; 2. Unless...