Signal conditioning modulesTFxxxxN Series Active high precision output signal conditioning module FEATURES • Two- port isolation (signal input and signal output) • High accuracy, High linearity (0.1% F.S.) • Isolation voltage (2KVAC/60s) • Low ripple & noise: (^30mVpp, 20MHz) • Extremely low temperature coefficient (^50PPM/°C, within -40 to +85C) PART NUMBER SYSTEM FxxxxN • Compact size: DIP18 (26*9.5*12.5mm) • ESD protection (IEC/EN61000-4-2 Contact ±4KV perf. Criteria B) Package Isolation power output Power supply Signal Output Signal Input Isolation Amplifier The TFxxxxN series is with preceding voltage signal input and backward voltage/current signal output, and with an inner high efficiency isolated micro-power source, it can provide isolation power to peripheral circuit at the same time of providing power to internal signal processing circuit. Adopting electromagnetism isolation technology, therefore compared with phofo-coup/er isolation, it has higher accuracy and lower temperature drift. This module is two-port isolation (input and output). There are external functions for the series as zeros and full adjustment, convenient for customer to design and adjust. Note: * When the input signal is open, if the output signal value need near 0, please connect a resistor( < 100KQ ) in parallel at the signal input port (near one end of the model). MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Signal conditioning modulesTFxxxxN Series signal Output 1. Please read the instructions carefully before use; contact our technical support if you have any problem; 2. Do not use the product in hazardous areas; 3. Use DC power supply for the product and 220V AC power supply is prohibited; 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment; 5. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 °C, humidity<75% with power input nominal voltage and rated signal output full load. MORNSUN GUANGZHOU...

Signal conditioning modules TFxxxxN Series After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact the local representative or our technical support. 2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use within the warranty period, the product can be repaired or changed for free. Applied circuit See Application Notes for Isolated Transmitter for details. Design...

Signal conditioning modules TFxxxxN Series 3) Application——Zero and full adjustment function Zero and full adjustment recommended setting circuit is as shown Power input Singal input Singal output Fig. 3 Zero and full adjustment circuit Zero adjustment function by setting up adjustment resistor at the zero point can change the zero signal transmission, which makes the output signal overall migration. Full adjustment function is also called the gain adjustment function, and it can change the ratio of signal transmission through the set up corresponding adjust resistance at the full adjustment,...

Signal conditioning modulesTFxxxxN Series Components 2. For more information please find the application notes on www.mornsun-power.com 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58240002; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company's corporate standards; 4. The performance indexes of the product models listed in this datasheet are as above, but some...