TDx01D485H-E
1 /4Pages

Catalog excerpts

MORNSUN® Single high speed RS485 isolation transceiver module(enhanced version) FEATURES • Baud rate high up to 500Kbps • The bus is able to support 256 nodes at maximum • 2500VDC isolation voltage (input and output) • Integrated high efficiency isolated DC/DC converter • Operating temperature range: -40°C to +85°C • ESD protection (IEC/EN61000-4-2 Contact ±4KV perf. Criteria B) • IEC60950, UL60950, EN60950 approval PART NUMBER SYSTEM TD50 Special mark Rate Port signal type Package type Channel number Power distrubution output Power input Digital bus interface product type Single high rate RS485 isolation transceiver module TD30iD485H-E/TD50iD485H-E series are RS485 transceiver module with Integrated Isolated power. Signal isolated chip and the bus protection device. Product's main function is to convert logic level to difference level of the RS485 agreement, and It implements the function of signal isolation. Products is with isolation power, it can achieve2500 VDC electrical isolation and have the function of ESD protection. Product can be easily embedded user equipment, makes the equipment easily implement connection of RS485protocol network. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

MORNSUN* Truth Table 1. Please read the technical manual carefully before use; contact our technical support if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact the local representative...

Open the catalog to page 2

Industrial Bus TDx01D485H-E Series Design Reference 1. Typical application circuit +5V Conventional Circuit Recommended external circuit parameters: Notes: 1. GDT1, GDT2 and GDT3 be used instead of a three terminal gas discharge tubey. Such as GDT1, GDT2 and GDT3 three two-terminal device available gas discharge tube instead of a three-terminal at "± 4KV / ± 6KV" hierarchy, as B3D090L-C. 2. It is not needed the component when parameter with the symbol of "--". 3. For more information please find the application notes on www.mornsun-power.com MORNSUN Guangzhou Science & Technology Co., Ltd. reserves...

Open the catalog to page 3

MORNSUN*Dimensions and Recommended Layout Front View Note: Unit :mm[inch] Pin diameter tolerances :±0.10[±0.004] General tolerances:±0.25[±0.010] 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58040012; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company's corporate standards; 4. The performance indexes of the product models listed in this datasheet are as above,...

Open the catalog to page 4