Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
TDx01D485H-A

TDx01D485H-A
4Pages

Catalog excerpts

MORNSUN® single module high speed RS485 isolation transceiver (automatic switch to send and receive) FEATURES • Baud rate high up to 115200bps • Connect up to 32 nodes on one bus • 2500VDC isolation input and output • Integrated high efficiency isolated DC/DC converter • Operating temperature range: -400C~ +850C • ESD protection, perfect EMC recommend circuit • Automatic transceiver switching Single high speed RS485 isolation transceiver module TD301D485H-A/ TD501D485H-A series are RS485 transceiver module with integrated isolated power, Signal isolated chip and the bus protection device. Product's main function is to convert logic level to difference level of the RS485 agreement, and it implements the function of signal isolation.Products is with isolation power. It can achieve 2500 VDC electrical isolation and have the function of ESD protection and automatic switch to send and receive. It does not need to control through the CON pin, and reduce the complexity of the design. Product can be easily embedded user equipment, makes the equipment easily implement connection of RS485 protocol network. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD, MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

MORNSUN General Specifications 1. Please read the technical manual carefully before use; contact our technical support if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact the local...

Open the catalog to page 2

MORNSUNDesign Reference1. Typical application New Circuit Recommended external circuit parameters: ® GDT1, GDT2 and GDT3 be used instead of a three terminal gas discharge tube. Such as GDT1, GDT2 and GDT3 three two-terminal device available gas discharge tube instead of a three-terminal at "± 4KV / ± 6KV" hierarchy, as B3D090L-C. ® It is not needed the component when parameter with the symbol of"--". 3. For more information please find the application notes on www.mornsun-power.com MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the...

Open the catalog to page 3

Industrial Bus TDx01D485H-A Series Dimensions and Recommended Layout Packing Information please refer to 'Product Packing Information'. Packing bag number: 58040012; Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25℃, humidity<75% when inputting nominal voltage and outputting rated load; All index testing methods in this datasheet are based on our Company’s corporate standards; The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model products will exceed the above-mentioned...

Open the catalog to page 4