TAxxxW-EX-xx
1 /4Pages

Catalog excerpts

TAxxxW-EX-xx series 12.5mm analog signal isolators / Transducers power supply FEATURES • Three-port isolation (input, output and power supply; 2.0KVAC) • High accuracy (0.1% FS.) • High linearity (0.1% FS.) • Low temperature drift(50PPM/°C) • Excellent EMC characteristics • The products of current input and voltage output support HART communication protocol • With the base power supply • High reliability(MTBF>500,000 hours) Ultra-thin analog signal Output Isolation safety Barrier, the current (voltage) signal come from the safe area is processed linearly, and then isolation transmission to the dangerous areas and output in a standard current signal. Limiting the energy of intrinsically safe end string into hazardous area, to ensure that the system is intrinsically safe explosion-proof performance. Connection of field devices: 2-wire or 3-wire isolation transducer, industrial standard current source, industrial standard voltage source.. Connection of the work regions: Zone 0, Zone 1, Zone 2; HA, HB, HC, and hazardous area of T4~T6. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

TAxxxW-EX-xx series Standards & Certificates Physical Specifications Application Precautions 1. Please read the instructions carefully before use; contact our technical support if you have any problem; 2. Do not use the product in hazardous areas; 3. Use DC power supply for the product. and 220V AC power supply is prohibited; 4. Do not disassemble or assemble the product without permission to avoid explosion protection failure or malfunction of product. MORNSUN* MORN5UN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of...

Open the catalog to page 2

TAxxxW-EX-xx series Design Reference 1. Wiring diagram for product application Bottom power supply port TT Note: When use bottom power supply, anyone group or both is OK. 1) The instrument wiring using direct plug wiring terminal, easy to use; 2) Recommended the sectional area of conductor is 0.5mm2-2.5 mm2; 3) Recommended the length of conductor exposed is 8mm and is fastened by M3 bolts. MORN5UN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 3

TAxxxW-EX-xx series 2. Application in industry 1) Take care of output independence of isolator or isolator with isolation power output and loop resistance to make sure the its output voltage meets the minimum operation voltage requirement of field device. 2) In the field application, isolator should not be installed In intrinsically safe area. 3) Select suitable isolator which matches the field device according to its power polarity, signal type and transmission mode. 3. For more information please find the application notes on www.mornsun-power.com Installation & disassembly Installation DIN35mm...

Open the catalog to page 4