Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
TAxxxPW

TAxxxPW
5Pages

Catalog excerpts

Isolated TransmitterTAxxxPW seriesProgrammable analog isolators with isolated power outputRoHS FEATURES • Input, output and power supply are mutually isolated from each other • 12.5mm ultra-thin case • High accuracy (0.1 % F.S.) • High linearity (0.1 % F.S.) • Extremely low temperature coefficient (50PPM/° C) • Low power consumption • Excellent EMC performance • Mini USB port communication • Input / Output range programmable • High reliability (MTBF>500,000 hours) TAxxxPW series analog Isolator and Isolator with Isolation po wer output which are mainly applied in industrial automation systems can isolated convert analog input signal of the industrial field instruments to the matched analog output signal for the DCS/PLC, realizing the acquisition and transmission of field signal. An independent power supply is needed for the product and the port of power supply, input and output are isolated from each ofhei This series of products contain combinations of 1 input 1 output, 1 input 2 output, 2 input 2 output and so on. The thickness of 12.5mm meet the need for high density field installation. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

Isolated TransmitterTAxxxPW series Output Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

Isolated TransmitterTAxxxPW seriesApplication Precautions 1. Please read the instructions carefully before use; contact our technical support if you have any problem; 2. Do not use the product in hazardous areas; 3. Use DC power supply for the product. and 220V AC power supply is prohibited; 4. Do not disassemble or assemble the product without permission to avoid explosion protection failure or malfunction of product. 1. Wiring diagram for product application Programmable analog signal isolator MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co.,...

Open the catalog to page 3

Isolated Transmitter TAxxxPW series TA2x0PW Control Area Control Area Control Area Powe r ① Use dismountable terminals for instrument wiring, easy to operate; ② The sectional area of conductor is 0.5mm2-2.5 mm2; ③ The length of conductor exposed is 8mm and is fastened by M3 bolts. 2. For more information Please find the application notes on www.mornsun-power.com Installation & disassembly Installation DIN35mm standard rail installation 1. Insert the top of the instrument card in the rail; 2. Push the bottom of the instrument into the rail. 1. Insert to the clamp on the lower end of...

Open the catalog to page 4

Note: Unit:mm[inch] General tolerances:±0.50[±0.002] Wire range:28~12 AWG PWR Power Indicator A1 Channlel Warning Light A2 Channle2 Warning Light 1. Packing information please refer to "Product Packing information".Packing bag number: 58040010; 2. Unless otherwise specified, parameter indexes in this datasheet is measured under the conditions of Ta=25 ° C, humidity<75% with nominal input voltage and rated output load; 3. All testing methods in this datasheet are based on our Company's corporate standards; 4. The parameter indexes above are for the modules listed in this datasheet, for...

Open the catalog to page 5