*mydirectindustry

Catalogs
MORNSUN Guangzhou Science & Technology Co.,Ltd.
TAx06W-xx

TAx06W-xx

Product catalog summary

Product Overview: The TAx06W-11 Series are 12.5mm slim case passive signal isolators designed for industrial automation systems. They receive 4~20mA signals from field equipment and provide isolated outputs to DCS/PLC systems, enhancing system stability by eliminating ground loops and reducing noise.

Features: The isolators offer two-port electrical isolation, high accuracy and linearity (0.1% F.S.), low temperature drift (35PPM/°C), and high reliability with an MTBF of over 500,000 hours.

Specifications:

Input Signal: 4~20mA
Input Impedance: 5V at 20mA
Output Signal: 4~20mA
Output Load: ≤ 300Ω
Isolation Strength: DC3000V@1min; AC2000V@1min
Operating Temperature: -25 to +71°C

Models:

TA306W-11: 3 channels
TA206W-11: 2 channels
TA106W-11: 1 channel

Installation: The product is installed on a DIN35mm standard rail. It involves inserting the top of the instrument card into the rail and pushing the bottom into place.

Operation Notes: Users are advised to read the manual carefully, avoid using the product in hazardous areas, and not disassemble the product to prevent voiding explosion proof or causing failure.

After-Sales Service: MORNSUN provides a 3-year warranty from the manufacturing date, offering repair or replacement for manufacturing defects.

Contact Information: MORNSUN Science & Technology Co., Ltd., Guangzhou, China. Tel: 86-20-38601850, Email: [email protected]

Catalog excerpts

The copyright and authority for the interpretation of the products are reserved by MORNSUN

Open the catalog to page 1

Service environment No dust, strong vibration, shock and corrosion of the gas product in surroundings Note:1. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. All characteristics are meant for listed model, non-standard models may perform differently, you can contact MORNSUN FAE for more details. 1. Please read the user manual carefully before using. If any question, please contact our technical support department. 2. Please don't use this product in hazardous area. 3. To avoid void of explosion proof, or any failure,...

Open the catalog to page 2

INSTALLATION & DISASSEMBLY DIN35mm standard rail installation: Insert the top of the instrument card in the rail; Push the bottom of the instrument into the rail. 1. Insert a screwdriver between the bottom of the card lock and the rail; 2. Pull up the screwdriver and press the card lock downwards; 3. Pull the instrument out of the rail. 3 1 2 2 PACKAGING DIMENSION & PACKAGING DIAGRAM Note: 1. All specifications are measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. In this datasheet, all the test setup and methods are based on our corporate...

Open the catalog to page 3

All MORNSUN Guangzhou Science & Technology Co.,Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list