T1100L-F signal converter
1 /2Pages

Catalog excerpts

PASSIVE LOOP-POWERED ISOLATION TRANSMITTER Iin & Iout FEATURES  Loop-powered with Over-current Protection  Accuracy(0.3% F.S.)  High linearity (0.1% F.S.)  High isolation voltage(3KVDC/60s) ——T1100L-F  Extremely low temperature drift(35PPM/°C)  High reliability(MTBF>500,000 hours) GENERAL DESCRIPTION T1100L-F Isolation transmitter is a kind of two-wire looppowered isolation module. The output device could receive the signal from input instrument also powered the input instrument throughT1100L-F.Adopting unique electromagnetism isolation design and high efficiency loop electric-larceny technology independent power supply is not required for the module, realizing 4~20mA standard signal isolation with high ac-curacy it match to kinds of equipment mod-ule input attachment (PLC/DCS act); Over-current Protection is designed to protect the isolation module and the latter circuit; Besid-es, the module have extremely low temper-ature drift(no more than 35PPM/℃ under -25℃~+71℃ ).The isolation voltage between the input and output can be up to 3KVDC. PART NUMBER SYSTEM Loop power Package Isolation power output Power supply Signal output Signal input Isolation amplifier SELECTION GUIDE Model loop Power Supply Voltage Maximum loop Power Supply Voltage* Note: *Exceeding the maximum loop power supply voltage will damage the product. ELECTRICAL SPECIFICATIONS Input Signal Output Signal With Load Ability RL≤（Us –5）/0.02 Us：loop power supply voltage Load Regulation Input Over-voltage Voltage Drop-out TRANSMISSION SPECIFICATIONS Zero Offset Gain Error Temperature drift coefficient ISOLATION SPECIFICATIONS Galvanic Isolation Two-port isolation (Between signal input and signal output) Isolation Voltage Insulation Resistance 100MΩ,500VDC (Between signal input and signal output) OTHER CHARACTERISTICS Ambient Temperature Operation temperature:-25°C ~ +71°C Transport and Storage temperature:-50°C ~ +105°C Application Environment No dust, fierce vibration, impulsion and corrosive gas Note: 1. All specifications measured at TA=25°C, humidity<75%, the value of nominal input and rated output load unless otherwise specified. 2. All characteristics are meant for listed model, non-standard models may perform differently, you can contact MORNSUN FAE for more details. The copyright and authority for the interpretation of the products are rese

Open the catalog to page 1

1. Please read the user manual carefully before using. If any question please contact our technical support department. 2. Please do not use this product in hazardous area. 3. To avoid invalid explosion protection function, or any failure, users disassemble this product is forbidden. AFTER-SALES SERVICE 1. Products are carefully inspected and quality control during production and before shipment. If they operated abnormally or there were anything wrong, please contact our agent where purchased or MORNSUN FAE as soon as possible. 2. MORNSUN warranty our product for 3 years from manufacturing date....

Open the catalog to page 2