T1100(N)NS
1 /3Pages

Catalog excerpts

MORNSUN* Passive high precision isolated transmitter PART NUMBER SYSTEM xxxxP Package Isolation power output Power supply Signal Output Signal Input Isolation Amplifier FEATURES • Two- port isolation (signal input and signal output) • High precision (0.1% F.S.) • High linearity (0.1% F.S.) • Isolation voltage (3KVDC/60s) • Extremely low temperature coefficient (35PPM/°C) • Industrial grade (operating temperature range: -25to +71C) • High reliability (MTBF >500,000 hours) • Low voltage-drop(3V typ: @ 20mA input) T1100N/NS senes are a passive signal isolation module with a standard analog amplifier 4~20mA current signal Input and 4~20mA current signal output. Adopting unique electromagnetism isolation design and high efficiency loop electric-larceny technology, independent power supply is not required for the module, realizing 4~20mA standard signal isolation wth high accuracy and linearity. Besides, the modules have extremely low temperature drift (no more than 35ppm/° C under -25C~ +71 C) The Isolation voltage between the input and output can be up to 3KVDC. Selection Guide Input Specifications Output Specifications Transmission Specifications MORNSUN MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

Isolated TransmitterT1100N/NS Series General Specifications 1. Please read the instructions carefully before use; contact our technical support if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. 5. For T1100NS products is prohibited reflow. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of...

Open the catalog to page 2

Isolated TransmitterT1100N/NS SeriesDimensions and Recommended Layout Note: 1. Packing information please refer to "Product Packing Information". Packing bag number: 58210019; 2. Unless otherwise specified, parameter indexes in this datasheet is measured under the conditions of Ta=25°C, humidity<75% with nominal input voltage and rated output load; 3. All testing methods in this datasheet are based on our Company's corporate standards; 4. The parameter indexes above are for the modules listed in this datasheet, for non-standard module's parameter indexes, please contact our technicians for specific...

Open the catalog to page 3