Mornsun Enclosed power supply LM200-12Bxx
1 /4Pages

Catalog excerpts

AC/DC 200W Enclosed Switching Power SupplyLM200-12Bxx, LM200-12Bxx-Q Series C € @> RoHS FEATURES • AC input range: 176 - 264VAC • DC input range: 240 - 373VDC • Ultra low standby power consumption: < 0.75W @230VAC • Operating ambient temperature range: - 30°C to +70°C • Compact size with 1U low profile • LED indicator for power on • Output short circuit, over-current, over-voltage, over-temperature protection • Safety according to IEC/EN/UL62368, EN60335, GB4943 • Withstand 300VAC surge input for 5s • Operating altitude up to 5000m LM200-12Bxx series is one of Mornsun's enclosed AC-DC switching power supply, it features AC input and at the same time accepts DC input voltage., cost-effective, low no load power consumption, high efficiency and high reliability. These power supply offer excellent EMC performance and meet IEC/EN6!000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, GB4943 standards and they are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interp

Open the catalog to page 1

Mornsun Enclosed power supply LM200-12Bxx-2

AC/DC 200W Enclosed Switching Power SupplyLM200-12Bxx, LM200-12Bxx-Q Series Note: *The "Tip and barrel method" is used for ripple and noise test, please refer to Enclosed Switching Power Supply Application Notes for specific information. Mechanical Specifications MORNSUN Guangzhou Science & Technology Co., Ltd. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

Mornsun Enclosed power supply LM200-12Bxx-3

AC/DC 200W Enclosed Switching Power SupplyLM200-12Bxx, LM200-12Bxx-Q Series RS Remark: 1, One magnetic bead(nickel-zinc ferrite)should be coupled with the output load line during CE/RE testing; 2, This power supply does not meet the harmonic current requirements specified in EN61000-3-2. Please do not use this power supply under the following conditions: 1) The terminal equipment is used in the European Union. 2) Supporting terminals are connected to a public power grid with 220VAC or a higher voltage that comply with the requirements of EN61000-3-2. 3) The power supply is installed in terminal...

Open the catalog to page 3

Mornsun Enclosed power supply LM200-12Bxx-4

THIRD ANGLE PROJECTION Right View Customer System Power Case Bottom View Unit: mm[inch] General tolerances: ± 1.00[± 0.039] ®- ® any position must be connected to PE 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220068; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and rated output load; 3. The ambient temperature derating of 5C/1000m is needed for operating altitude greater than 2000m; 4. All index testing methods in this datasheet...

Open the catalog to page 4