Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L
1 / 5Pages

Catalog excerpts

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L - 1

MORNSUN Low power consumption single RS485 isolated transceiver module FEATURES • Ultra-low quiescent current, 8 mA • Integrated high efficient isolated DC-DC converter • High baud rate up to 19.2kbps • Two-port isolation test voltage(3.0kVDC) • Operating ambient temperature range: -40°C to +85°C • The bus supports maximum 16 nodes • Set isolation and ESD bus protection in one • Used in coal mines, chemical industries request ultra-low power consumption The main function of the TD321D485-L/TD521D485-L series is to convert a logic level signal into isolated RS485 differential level signals. The special integrated IC technology of the RS485 transceiver achieves isolation between the power supply and the signal lines isolation, does RS485communication and protects the bus all in one and the same module. The product's isolated power supply withstands a test voltage of up to 3000VDC. Also, they can easily be embedded in the user's end equipment, to achieve fully functional RS485network connections. The products feature ultra-low power consumption and are guaranteed in coal mines, chemical industry areas with continue operating at low energy consumption. Selection Guide Absolute Limits MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L - 2

MORNSUN RXD Output Current Transmission Specifications Output Specifications Truth Table Specifications General Specifications Mechanical Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L - 3

Application Precautions 1. Carefully read and follow the instructions before use; contact our technical support if you have any question; 2. Do not use the product in hazardous areas; 3. Use only DC power supply source for this product. 220V AC power supply is prohibited; 4. It is strictly forbidden to disassemble the product privately in order to avoid product failure or malfunction. After-sales service 1. Factory inspection and quality control are strictly enforced before shipping any product; please contact your local representative or our technical support if you experience any abnormal...

Open the catalog to page 3

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L - 4

MORNSUN® Note: Ground shield of twisted wire pair reliably. Recommended components and values: 2) TD521D485-L is for 5V TTL level only (not compatible with 3.3V); TD321D485-L is for 3.3V TTL level only (not compatible with 5V). 3) Pin6 are not drawn. Please leave pin 10 open if unused. 4) We recommend using a shielded twisted pair of wires for the Data transmission line and using same single point earth connection for each of the networks. 5) From the truth table characteristics, it can be derived that the isolated RS-485 transceiver module's CON pin is low to send data and high when...

Open the catalog to page 4

MORNSUN DIP Low power consumption Compact Size RS485 isolated transceiver module TD_D485-L - 5

Front View Input Power+ Send&Receiving Control Pin Isolation Power Output +5V TD_D485-L A Pin Isolation Power Output RGND 1. For additional information on Product Packaging please refer to www.mornsun-power.com. The Packaging bag number: 58240010; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and rated output load; 3. There may be slight colour difference on the surface of the PCB, which is normal and does not affect product use; 4. All index testing methods in this datasheet are based on...

Open the catalog to page 5