MORNSUN 240W AC/DC DIN Rail Power Supply LIF240-10BxxR2
1 /4Pages

Catalog excerpts

AC/DC 240W Enclosed Switching Power Supply LIF240-10BxxR2 Series FEATURES  Universal 85 - 264VAC or 120 - 370VDC Input voltage  Accepts AC or DC input (dual-use of same terminal)  Operating ambient temperature range: -40℃ to +70℃  High efficiency, high reliability  DC OK function  Built-in active PFC function  150% peak load output for 3 seconds  LED indicator for power on  Output short circuit, over-current, over-voltage, over-temperature protection RoHS LIF240-10BxxR2 is Mornsun AC-DC converter series featuring a cost-effective, energy efficient green power supply solution for standard DIN-rail mounting. The products offer a high level of stability and immunity to noise for industrial control equipment, machinery, and other industrial equipment in a variety of harsh environments. These light weight AC-DC converters have an extremely compact design and the standard rail installation for space saving. With good EMC performance, compliant with international IEC/EN/UL62368, UL61010 standards for EMC and safety. Selection Guide Certification UL/CE (Pending) Nominal Output Voltage and Current (Vo/Io) Output Voltage Adjustable Range (V) Input Specifications Item Input Voltage Range Operating Conditions Input Voltage Frequency Input Current Inrush Current Power Factor Leakage Current Cold start Output Specifications Item Operating Conditions Output Voltage Accuracy Full load range Line Regulation Rated load Load Regulation Ripple & Noise* MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and r

Open the catalog to page 1

MORNSUN 240W AC/DC DIN Rail Power Supply LIF240-10BxxR2-2

AC/DC 240W Enclosed Switching Power Supply LIF240-10BxxR2 Series 24V (peak-to-peak value) Stand-by Power Consumption Hold-up Time Short Circuit Protection Recovery time < 10s after the short circuit disappear. Over-current Protection Constant current, continuous, self-recovery Normal temperature, high temperature ≤18V (Output voltage turn off, re-power on for recover) ≤35V (Output voltage turn off, re-power on for recover) ≤60V (Output voltage turn off, re-power on for recover) Over-voltage Protection Note: 1.*The “Tip and barrel method” is used for ripple and noise test, output parallel 47uF...

Open the catalog to page 2

MORNSUN 240W AC/DC DIN Rail Power Supply LIF240-10BxxR2-3

AC/DC 240W Enclosed Switching Power Supply LIF240-10BxxR2 Series Electromagnetic Compatibility (EMC) CE IEC/EN 61000-4-5 line to line ±2KV/line to ground ±4KV Voltage dips, short interruptions and voltage variations immunity Product Characteristic Curve Note: 1.With an AC input voltage between 85 -100VAC and a DC input between 120-140VDC the output power must be derated as per the temperature derating curves; 2.This product is suitable for applications using natural air cooling; for applications in closed environment please consult Mornsun FAE. MORNSUN Guangzhou Science & Technology Co., Ltd....

Open the catalog to page 3

MORNSUN 240W AC/DC DIN Rail Power Supply LIF240-10BxxR2-4

AC/DC 240W Enclosed Switching Power Supply LIF240-10BxxR2 Series Dimensions and Recommended Layout For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220199; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load; The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m; All index testing methods in this datasheet are based on our company corporate standards; In order to improve the efficiency...

Open the catalog to page 4