Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx

MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx
4Pages

Catalog excerpts

MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx - 1

MORNSUN® C € @> RoHS FEATURES • Selectable AC input range: 90 - 132VAC/180 - 264VAC • DC input range: 240 - 373VDC(Switch in position of 230) • Ultra low standby power consumption < 0.75W @230VAC • Operating ambient temperature range: - 30°C to +70°C • Compact size with 1U low profile • LED indicator for power on • Output short circuit, over-current, over-voltage, over-temperature protection • Safety according to IEC/EN/UL62368, EN60335, GB4943 • Withstand 300VAC surge input for 5s (Switch in position of 230) • Operating altitude up to 5000m LM200-10Bxx series is one of Mornsun's enciosedAC-DC switching power supply, it features selectable AC input and at the same time accepts DC input voltage, cost-effective., low no load power consumption, high efficiency and high reliability. These power supply offer excellent EMC performance and meet IEC/EN6I000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, GB4943 standards and they are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc. Selection Guide Input Specifications Output Specifications MORNSUN Guangzhou Science & Technology Co., Ltd. MORNSUN* A 2019.12.10-A/5 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx - 2

Line Regulation Short Circuit Protection Recovery time <5s after the short circuit disappear. Hiccup, continuous, self-recovery Over-current Protection Over-voltage Protection Hiccup, self-recovery Over-temperature Protection General Specifications Note: *The "Tip and barrel method" is used for ripple and noise test, please refer to AC-DC Converter Application Notes for specific information. MORNSUN Guangzhou Science & Technology Co., Ltd. 2019.12.10-A/5 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx - 3

AC/DC 200W Enclosed Switching Power SupplyLM200-10Bxx, LM200-10Bxx-Q Series Electromagnetic Compatibility (EMC) Remark: 1, One magnetic bead(nickel-zinc ferrite)should be coupled with the output load line during CE/RE testing; 2, This power supply does not meet the harmonic current requirements specified in EN61000-3-2. Please do not use this power supply under the following conditions: 1) The terminal equipment is used in the European Union. 2) Supporting terminals are connected to a public power grid with 220VAC or a higher voltage that comply with the requirements of EN61000-3-2. 3) The...

Open the catalog to page 3

MORNSUN 200W AC/DC Enclosed Switching Power Supply LM200-10Bxx - 4

AC/DC 200W Enclosed Switching Power SupplyLM200-10Bxx, LM200-10Bxx-Q SeriesDimensions and Recommended Layout 179.00 [7.047] THIRD ANGLE PROJECTION Right View Front View Screw Spec. Customer System Power Case Bottom View Unit: mm[inch] General tolerances: ©>- © any position must be connected to PE 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220068; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and rated output load; 3....

Open the catalog to page 4