MORNSUN 1W isolated DC-DC converter B_XT-1WR2/Fixed input voltage/single output
1 /5Pages

Catalog excerpts

DC/DC ConverterB_XT-1WR2 Series1W isolated DC-DC converter Fixed input voltage, unregulated single output cTOus C € CB Patent Protection RoHS FEATURES • Continuous short-circuit protection • Operating ambient temperature range: -40 °C ~ +105 °C • Compact SMD package • I/O isolation test voltage 1.5k VDC • Internal surface mounted design • No extra components required • Industry standard pin-out • IEC62368, UL60950, EN60950 approved B_XT-1WR2 series are specially designed for applications where an Isolated voltage Is required In a distributed power supply system. They are suitable for 1 W/herethe voltage of the input power supply is stable (voltage variation: ±10%V!n); 2 Where isolation between input and output is necessary (isolation voltage ^1500VDC); 3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required; 4. Typical application: digit circuit condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

MORNSUN 1W isolated DC-DC converter B_XT-1WR2/Fixed input voltage/single output-2

DC/DC ConverterB XT-1WR2 Series Input Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

MORNSUN 1W isolated DC-DC converter B_XT-1WR2/Fixed input voltage/single output-3

DC/DC ConverterB_XT-1WR2 Series Mechanical Specifications MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 3

MORNSUN 1W isolated DC-DC converter B_XT-1WR2/Fixed input voltage/single output-4

DC/DC ConverterB_XT-1WR2 Series Design Reference 1. Typical application circuit Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig.3. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Table 1: Recommended capacitive load value table 2. EMC (CLASS B) compliance circuit LDM Vin 3. Minimum output load...

Open the catalog to page 4

MORNSUN 1W isolated DC-DC converter B_XT-1WR2/Fixed input voltage/single output-5

DC/DC ConverterB XT-1WR2 Series Notes: 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Tube Packaging bag number: 58210024, Roll Packaging bag number: 58200054; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage...

Open the catalog to page 5