IF_XT-1WR2
1 /4Pages

Catalog excerpts

DC/DC ConverterIF_XT-1WR2 series 1W, Fixed input voltage, isolated & regulated single output Circuit Protection FEATURES • High efficiency up to 74% • Isolation voltage: 3K VDC • Operating temperature range: -40C to +85C • Compact SMD package • Internal surface mounted design • No external component required • International standard pin-out iF_XT-iWR2 series is specially designed for applications where an isolated voltage is required in a distributedpower supply system, it Is suitable for: J. Where the voltage of the input power supply is stable (voltage variation: ±5%Vin); 2 Where isolation is necessary between input and output (isolation voltage ^3000VDC); 3. Where has high requirement of line regulation, load regulation and the ripple & noise of the output voltage. Output Specifications Item MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC ConverterIF_XT-1WR2 series Temperature Coefficient MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC ConverterIF_XT-1WR2 series Design Reference 1. Typical application If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.2. Moreover, choosing suitable filter capacitor is very important, start-up problems may be caused by too large capacitance.To ensured the modules running well, the recommended capacitive load values as shown in Table 1. Recommended capacitive load value table (Table 1) 2. EMC typical recommended circuit Vin O- 3. Output load requirements In order to ensure the converter can work reliably...

Open the catalog to page 3

DC/DC ConverterIF_XT-1WR2 seriesDimensions and Recommended Layout Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58210023; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25”C, humidity<75%RH with nominal input...

Open the catalog to page 4