IB05_XT-W75R3
1 /4Pages

Catalog excerpts

DC/DC Converter IB05_XT-W75R3 series 0.75W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range -40℃ to +85℃  High efficiency up to 74%  Compact SMD package  I/O isolation test voltage 1.5k VDC  Industry standard pin-out  Designed to meet UL/EN62368 (Approval Pending) Patent Protection RoHS IB05_XT-W75R3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are particularly suitable for applications of : pure digital circuits, general low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Certification Full Load Efficiency(%) Min./Typ. Capacitive Load Input Specifications Item Input Current (full load / no-load) Operating Conditions Reflected Ripple Current* Input Filter Capacitance Filter Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Linear Regulation Input voltage change: ±1% Voltage Accuracy Other output Load Regulation Temperature Coefficient Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and r

Open the catalog to page 1

DC/DC Converter IB05_XT-W75R3 series General Specifications Item Operating Conditions Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. Input-output Electric Strength Test for 1 second with a leakage current of 1mA max. Case Temperature Rise Other output Storage Temperature Derating when operating temperature up to 71℃ (see Fig. 1) Operating Temperature Isolation Capacitance Insulation Resistance Peak temp.≤245℃, maximum duration time≤60s over 217℃ Reflow Soldering Temperature* Storage Humidity Switching Frequency 100% load, nominal input voltage Moisture Sensitivity...

Open the catalog to page 2

DC/DC ConverterIB05_XT-W75R3 seriesDesign Reference 1. Typical application Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig.2. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. O+Vo Table 1 :Recommended input and output capacitor values MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou...

Open the catalog to page 3

IB05_XT-W75R3 series THIRD ANGLE PROJECTION Front View Pin-Out Pin Function Unit: mmlinchl NC: Pin to be isolated from circuitry 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Tube Packaging bag number: 58210024, Roll Packaging bag number: 58200054; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under...

Open the catalog to page 4