IB_XT-1WR2
1 /4Pages

Catalog excerpts

DC/DC Module Power SupplyIB_XT-1WR2 series 1W, Fixed input voltage , isolated & regulated single output Circuit Protection Patent Protection RoHS FEATURES • Continuous short circuit protection • Efficiency up to 75% • Operating temperature range: -40 °C to +85°C • Isolation voltage: 1.5K VDC • Miniature SMD package • No external component required • International standard pin-out /B_XT- 1WR2 series is specially designed for applications where an isolated voltage is required in a distributed power supply system, it is suitable for 1. Where the voltage of the input power supply is stable (voltage variation: ±5%Vm); 2.Where isolation is necessary between input and output (isolation voltage ^i500VDC); 3. Where has high requirement of tine reguiaton and load regulator). MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO..LTD.

Open the catalog to page 1

DC/DC Module Power SupplyIB_XT-1WR2 series General Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO..LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC Module Power SupplyIB_XT-1WR2 series Design Reference 1. Typical application If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.2. Moreover, choosing suitable filter capacitor is very important, start-up problems may be caused by too large capacitance.To ensured the modules running well, the recommended capacitive load values as shown in Table 1. Recommended capacitive load value table (Table 1) It is not recommended to connect any external capacitor when output power is less than 0.5W. □ Note: It...

Open the catalog to page 3

IB_XT-1WR2 seriesDimensions and Recommended Layout MORNSUN® Front View Right View THIRD ANGLE PROJECTION Unit: mm[inch] 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58210023; 2. If the product is operated under the min. required load, the product performance cannot be guaranteed to comply with all performance indexes in this datasheet; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. Unless otherwise specified, data in this data sheet should be tested under the conditions of Ta=25°C, humidity<75%...

Open the catalog to page 4