*mydirectindustry

IB_S-2W
1 /3Pages

Catalog excerpts

IB_S-2W Series 2W, FIXED INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER MODEL SELECTION IB0505S-2W Rated Power " Package Style Output Voltage Input Voltage Product Series FEATURES • Small Footprint • SIP Package • 1KVDC Isolation • Temperature Range: -40°C to +85°C • No Heat sink Required • Industry Standard Pinout • No External Component Required • RoHS Compliance APPLICATIONS The IB_S-2W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation <±5%); 2) Where isolation is necessary between input and output (isolation voltage <1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. PRODUCT PROGRAM OUTPUT SPECIFICATIONS *Test ripple and noise by “parallel cable” method. See detailed operation instructions at DC-DC Application Notes. COMMON SPECIFICATION The copyright and authority for the interpretation of the products are reserved by MORNSUN

Open the catalog to page 1

The copyright and authority for the interpretation of the products are reserved by MORNSUN

Open the catalog to page 2

1)Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load could not be less than 10% of the full load. H the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. 2)Recommended circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/D( converter, see (Figure 1). It should also be noted that the inductance and the frequency of the “LC” filtering network...

Open the catalog to page 3