H_S-2WR2
1 /5Pages

Catalog excerpts

Patent Protection 2W, Fixed input voltage, 4200VAC or 6000VDC isolated & unregulated positive-negative dual/single output cTOus C € FEATURES • SIP package • High efficiency up to 84% • Reinforced insulation • The patient leakage current: Max 2pA • Isolation voltage: 4200VAC or 6000VDC • Operating temperature range:-400C~+850C • Internal surface mounted design • International standard pin-out • Meets EN60601-1, ANSI/AAMI ES60601-1 standards (Pending) (1xMOPP/2xMOOP) G_S-2WR2 & H_S-2WR2 series meet reinforced Insulation requirements, /t is specially designed for applications where require compact size, highiso/alion, lowisolation capacitor and low leakage current power, itls w'deiyusedin medical, electricity, iGBT driver and so on. Itis suitable for: 1. Where the voltage of the input power supply is stable (voltage variation: ±i0%Vm); 2. Whereisolationis necessary betweeninput and output (isolation voltage ^4200VAC or6000VDC); 3. Where do not has high requirement of line regulation and the ripple & noise of the output voltage; Such as: Medical collection and isolation. High voltage collection circuit, iGBT-driven circuits, etc. Selection Guide Note:* The capacitive loads of positive and negative outputs are identical. MORN5UN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright an

Open the catalog to page 1

Input Specifications Capacitor filter MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC Converter G_S-2WR2 & H_S-2WR2 Series EMC Specifications Conducted emission CISPR22/EN55022 CLASS B (see Fig. 5 for recommended circuit) Electrostatic discharge CISPR22/EN55022 CLASS B (see Fig. 5 for recommended circuit) Radiated emission Product Characteristic Curve Other output 5VDC output Tolerance Envelope Cur ve Output Voltage Accuracy 40% 80% 60% Output Current Percent (Nominal Input Voltage) Output Current Percent (Nominal Input Voltage) Output Power Percentage(%) Output Voltage Accuracy Temperature Curve Safe Operating Area MORNSUN Guangzhou Science & Technology Co., Ltd. reserves...

Open the catalog to page 3

Design Reference 1. Typical application If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.3. Moreover, choosing suitable filter capacitor is very important, start-up problems may be caused by too large capacitance. To ensured the modules running well, the recommended capacitive load values as shown in Table 1. The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series...

Open the catalog to page 4

Dimensions and Recommended Layout 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58200013; 2. If the product is operated under the min. required load, the product performance cannot be guaranteed to comply with all performance indexes in this datasheet; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C, humidity<75% when inputting nominal voltage and outputting rated load; 5. All index testing...

Open the catalog to page 5