*mydirectindustry

Catalogs
MORNSUN Guangzhou Science & Technology Co.,Ltd.
FS-A01D / Surge Suppressor

FS-A01D / Surge Suppressor

1 / 3 PagesView full catalog

FS-A01D / Surge Suppressor

Product catalog summary

EMC Filter Features

Compact size designed to suppress DC power surges for primary protection.
Attenuation coefficient meets 30dB.
Cost-effective with low temperature rise.
No reverse connect protection function.
Mounting options include PCB, chassis with screw terminals, and DIN-Rail.

Application and Performance

The FS-A01D series, when applied to the input of a DC/DC module, significantly enhances EMS performance. When applied to the output, it reduces ripple and noise. It is crucial that the DC/DC module's maximum input voltage and current do not exceed the FS-A01D's specifications.

Selection Guide

The model FS-A01D supports an input voltage range of 0-40 VDC and a nominal current of 0.6A. Variants include chassis mounting (suffix "A2S") and DIN-Rail mounting (suffix "A4S").

General Specifications

Operating temperature: -40 to 85°C.
Storage temperature: -55 to 125°C.
Storage humidity: 5 to 95%.
Casing temperature rise at 0.6A input current is 15°C.
DC resistance between input and output is 600 mΩ.
Casing material is black flame-retardant heat-proof epoxy resin (UL94-V0).
Package dimensions vary by mounting type.

Surge Specifications

The FS-A01D ensures compliance with IEC/EN61000-4-5 surge levels of ±2KV (2Ω internal resistance) and ±4KV (12Ω internal resistance), achieving an attenuation of 30dB.

Design Reference

Includes internal schematic and typical application setup. Recommendations for fuse values are based on power module input current, and further details can be found in the technical manual.

Additional Notes

Packaging information is available under 'Product Packing Information'.
Data is tested under conditions of 25°C and humidity less than 75%.
Specifications are subject to change without notice, and customization services are available.

Catalog excerpts

EMC Filter FS-A01D Series EMC Filter FEATURES Compact size Design to suppress the DC power surge to achieve primary protection The attenuation coefficient of frequency meet 30dB Cost-effective Low Temperature rise No reverse connect protection function Mounting: PCB mounting, chassis mounting with screw terminals, DIN-Rail mounting RoHS FS-A01D put on to the input of DC/DC module can substantially improve the EMS performance of the module , FS-A01D put on to the output of DC/DC module can substantially reduce the ripple and noise of the module. FS-A01D used with the MORNSUN DC/DC module, DC/DC module’s max. Input voltage must less than FS-A01D’s max. Voltage, DC/DC module’s max. Input current must less than FS-A01D’s nominal current. Selection Guide Model Input Voltage Range (VDC) Nominal Current (A)(max) Note: series with suffix “A2S” are chassis mounting, with suffix “A4S” are DIN-Rail mounting, for example FS-A01DA4S. General Specifications Item Test Conditions Operating Temperature Storage Temperature Storage Humidity Casing Temperature Rise Input - Output General Specifications Black flame-retardant heat-proof epoxy resin (UL94-V0) Casing Material Horizontal package A2S wiring package Package Dimensions Horizontal package/A2S wiring package/A4S rail package Surge Specifications Item Test Conditions Attenuation multiples Devise Standard FS-A01D can ensure MORNSUN DC/DC converter module meet Surge level of IEC/EN61000-4-5 ±2KV(2Ω internal resistance)/ ±4KV(12Ωinternal resistance). MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright

Open the catalog to page 1

FS-AOID Series Input voltage waveform (Differential mode 2.09KV) Output voltage waveform( 17.1V) Design Reference MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO..LTO. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

FS-AOID Series THIRD ANGiE PROJECTION 1. Packing Information please refer to 'Product Packing Information'. The Packing bag number of Horizontal package : 58220014, the 2. Unless otherwise specified, data in this data sheet should be tested under the conditions of Ta=25 C, humidity<75%; 3. All index testing methods in this datasheet are based on our Company's corporate standards; 4. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned reauirements, and please directly contact our technicians...

Open the catalog to page 3

FS-A01D / Surge Suppressor

FS-A01D / Surge Suppressor

Catalog excerpts

All MORNSUN Guangzhou Science & Technology Co.,Ltd. catalogs and technical brochures

Archived catalogs