Catalogs >
MORNSUN Guangzhou Science & Technology Co.,Ltd. >
FC-L01D

FC-L01D
5Pages

Catalog excerpts

 Compact size EMC Filter modules  Filters provide primary side protection by suppressing AC power surge in compliance with IEC61000-4-5  Filters input of power supply modules to ensure compliance with CISPR32/EN55032 Class B requirements  Allows cost-effective converter designs  Excellent temperature performance  Flexible mounting options include direct PCB mounting, chassis or DIN-Rail mounting with screw terminals These filter modules are extremely useful in noise-sensitive analog circuit applications. For compliance with IEC/EN61000-4-5 with surge levels of ±2kV (2Ω source resistance)/±4kV (12Ω source resistance) use FC-L01D on the input side of the AC-DC modules. For higher protection to surge levels of up ±4kV (2Ω source resistance)/±6kV (12Ω source resistance) according to IEC/EN61000-4-5 use module FC-L01D2 instead, which also ensures compliance to EMI requirements as per CISPR22 /EN 55022 Class B. With EMC filter used to protect MORNSUN AC-DC converter modules, the system’s max. Input voltage and Input current must not exceed the EMC filter’s maximum Voltage and/or nominal current specifications. Selection Guide Model Input Voltage Range (VAC) Nominal Current (A)(max) *Note: Series with suffix “A2” are chassis mounting, with suffix “A4” are DIN-Rail mounting. General Specifications Item Test Conditions Operating Temperature Storage Temperature Case Temperature Rise Leakage current (line to ground) Mechanical Specifications Case Material Flame-retardant package, meets UL94V-0 Horizontal package Horizontal package A2 wiring package A4 rail package Horizontal package/A2 wiring package/ A4 rail package Frequency Attenuation Specifications Item Frequency attenuation coefficient MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the

Open the catalog to page 1

EMC Filter FC-L01D & FC-L01D2 Series Standards Compliance FC-L01D filter module on the input of AC/DC converters are design to meet Surge levels up to ±2kV (2Ω source resistance) / ±4kV (12Ω source resistance) per IEC/EN61000-4-5. Using filter module FC-L01D2 instead to meet higher surge levels up to ±4kV (2Ω source resistance) / ±6kV (12Ω source resistance) per IEC/EN61000-4-5 and EMI requirements according to CISPR22/EN55022 Class B. Electromagnetic Compatibility (EMC) ①FC-L01D Surge Test Result Input voltage waveform (Differential mode 1.99KV) Input voltage waveform (Common mode...

Open the catalog to page 2

EMC Filter FC-L01D & FC-L01D2 Series Design Reference 1. Internal schematic IN(L) FUSE: Input currents can vary with different power modules. Therefore please refer to the individual specifications of the power converter used to identify the correct fuse values and make sure not to exceed the filter’s maximum specifications. 3. Compliance table when Filters are used with following Converter products Converter EMI (without external circuit) Surge (without external circuit) (without external circuit) MORNSUN Guangzhou Science & Technology Co., Ltd. reserve

Open the catalog to page 3

EMC Filter FC-L01D & FC-L01D2 Series Model EMI(withou t external circuit) Dedicated Power Converter For Power System LH(ER2) Series LM30-00J0512-03E (without external circuit) Surge(without external circuit) 4. For additional information please refer to the application notes on www.mornsun-power.com. FC-L01D Dimensions and Recommended Layout FC-L01D2 Dimensions and Recommended Layout MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final i

Open the catalog to page 4

EMC Filter FC-L01D & FC-L01D2 Series FC-L01DA2 & FC-L01D2A2 Dimensions For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number of PCB mount packages are 58220007 (FC-L01D) / 58220006 (FC-L01D2) respectively, and the Packaging bag number of A2/ A4 package is 58220010; The maximum capacitive load offered were tested at input voltage range and full load; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load; All index testing...

Open the catalog to page 5