F_XT-2WR2
1 /5Pages

Catalog excerpts

DC/DC Converter F XT-2WR2 Series MORNSUN® 2W, Fixed input voltage, isolated & unregulated single output d Patent Protection RoHS FEATURES • Operating temperature range: -40°C to +105°C • High efficiency up to 84% • Miniature SMD package • Isolation voltage: 3K VDC • No external component required • International standard pin-out F_XT-2WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for 1. Where the voltage of the input power supply is stable (voltage variation: ±i0%Vin); 2. Where isolation between input and output is necessary (isolation voltage ^3000VDC); 3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required; 4. Typica application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition; Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. MORNSUN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC Converter F XT-2WR2 Series MORNSUN® Output Specifications MORNSUN GUANGZHOU SCIENCC & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

MORNSUN® Product Characteristic Curve Temperature Derating Curve Input Voltage(V) Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. Recommended capacitive load value table (Table 1) MORNSUN A MORNSUN GUANGZHOU SCIENCC...

Open the catalog to page 3

DC/DC Converter F XT-2WR2 Series MORNSUN® 2. EMC solution-recommended circuit Note: 1.24V input series, 24V output series is subject to CY (CY: 1 nF/3KV). 2. It is not needed to add the component in the peripheral circuit when parameter with the symbol of"-". 3. Output load requirements When using, the minimum load of the module output should not be less than 10% of the nominal load. In order to meet the performance parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a resistor, Please note that the resistor needs to be used...

Open the catalog to page 4

DC/DC Converter F XT-2WR2 Series MORNSUN® Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58210024; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at nominal input voltage and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25t:, humidity<75% with nominal input voltage and...

Open the catalog to page 5