F_S-3WR2
1 /4Pages

Catalog excerpts

DC/DC ConverterF S-3WR2 Series 3W, fixed input voltage, isolated & unregulated single outputPatent Protection RoHS FEATURES • Operating temperature range: -40°C to +85°C • Compact SIP package • Isolation voltage: 3K VDC • High power density • No external component required • International standard pin-out F_S-3WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for J. Where the voltage of the input power supply is stable (voltage variation: ±i0%Vin); 2. Where isolation between input and output is necessary (isolation voltage ^3000VDC); 3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required; 4. Typical application: digit circuit condition; normal'low-frequency artificial'circuit condition; relay drive circuit condition, etc. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC Converter F S-3WR2 Series General Specifications MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

DC/DC ConverterF S-3WR2 Series Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. Recommended capacitive load value table (Table 1) 3. Output load requirements In order to ensure the converter can work reliably with...

Open the catalog to page 3

DC/DC ConverterF S-3WR2 SeriesDimensions and Recommended Layout Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58200001; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25C, humidity<75%RH with nominal input...

Open the catalog to page 4