DC/DC Converter wide input UWE_S-1WR3
1 /4Pages

Catalog excerpts

DC/DC ConverterUWE/F_S-1WR3 series 1W isolated DC-DC converter in SIP package Ultra-wide input and regulated single/dual outputC€ Patent Protection RoHS FEATURES • Ultra-wide input voltage range (8:1) • High efficiency up to 74% • No-load power consumption as low as 0.12W • I/O isolation test voltage 3K VDC • Operating ambient temperature range: -40°C to +105 °C • Input under-voltage, output short-circuit, over-current protection • Industry standard pin-out • EN62368 approved UWE/F_S-1WR3 series of isolated 1W DC-DC products with an ultra-wide 8:1 input voltage range. They feature efficiencies of up to 74%, 3000VDC input to output isolation, operating ambient temperature range of -40 V to +105 V, input under-voltage protection, output over-current., short circuit protection and they are widely used in applications such as medical care, industrial control., electric power, instruments and communication fields. Note: ® Exceeding the maximum input voltage may cause permanent damage; ® Efficiency is measured at nominal input voltage and rated output load; © The specified maximum capacitive load value for positive and negative output is identical. Input Specifications Item Output Specifications MORNSUN Guangzhou Science & Technology Co., Ltd. 2020.08.11-A/1 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC ConverterUWE/F_S-1WR3 series Load Regulation Note: ©Ripple & Noise at <5% load is 5%Vo max. The "parallel cable" method is used for ripple and noise test, please refer to DC-DC ConverterAppUcation Notes for specific information. MORNSUN Guangzhou Science & Technology Co., Ltd. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

Temperature Derating Curve Operating Temperature Design Reference 1 .Typical application All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. Parameter description: 2. EMC compliance circuit Parameter description: 3. It is not allowed to connect modules output...

Open the catalog to page 3

TKFD ^ IGLE PROJECTION Front View Bottom View NC. Not available for electrical connection 1. For additional information on Product Packaging please refer to www.mornsun-power.com. packaging number: 58210004; 2. The maximum capacitive load offered were tested at input voltage range and full load; 3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and rated output load; 4. All index testing methods in this datasheet are based on company corporate standards; 5. We can provide product customization service,...

Open the catalog to page 4