CF0505XT-1WR3
1 /3Pages

Catalog excerpts

DC/DC ConverterCF0505XT-1WR3 1W, Fixed input voltage, isolated & unregulated single outputPatent Protection RoHS FEATURES • Continuous short-circuit protection • Operating temperature range: -40C to +105°C • Compact SMD package • Isolation voltage: 3.5K VDC • International standard pin-out • Meet AEC-Q100 standards • The production is controlled by IATF16949 system requirements The CF0505XT-1WR3 is designed for application where isolated output is required from a distributed power system, it can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. MORNSUN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC Converter CF0505XT-1WR3 Peak temp.≤245℃, maximum duration time≤60s at 217℃ Reflow Soldering Temperature* Switching Frequency Full load, nominal input voltage Moisture Sensitivity Level (MSL) Note: * For actual application, please refer to IPC/JEDEC J-STD-020D.1. Physical Specifications Casing Material Black flame-retardant and heat-resistant plastic(UL94 V-0) Cooling Method CISPR25/EN55025 CLASS 1 (see Fig. 4 for recommended circuit) CISPR25/EN55025 CLASS 1 (see Fig. 4 for recommended circuit) Air ±8kV , Contact ±4kV perf. Criteria B Product Characteristic Curve Tolerance Envelope Cur ve...

Open the catalog to page 2

EMC recommended circuit value table (Table 2) 3. Output load requirements In order to ensure the converter can work reliably with high efficiency, the minimum load should not less than 10% rated load when it is used. If the needed power is indeed small, please parallel a resistor on the output side (The sum of the efficient power and resistor consumption power is not less than 10%). 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Tube Packing bag number: 58210024, Roll Packing bag number: 58200054; 2. If the product is not...

Open the catalog to page 3