B0560LD-1WR2
1 /4Pages

Catalog excerpts

1W, Fixed input voltage, isolated & unregulated single output Patent Protection RoHS FEATURES • Operating temperature range: -40°C to +85°C • High power density • Compact DIP package • Isolation voltage: 1.5K VDC • Meet automobile electronic standard: EMC specifications requirements • No external component required • International standard pin-out B0550LD-1WR2 & B0560LD-1WR2 are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: 1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2. Where isolation between input and output is necessary (isolation voltage ^7500VDC); 3. Where the output voltage regulation is not strictly required; 4. Typical application: digit circuit normal low-frequency artificial circuit, data switching circuit and battery management system (BMS) with balance control scheme of power supply circuit condition, etc. Selection Guide MORNSUN GUANGZHOU SCIGNCG & TGCHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC Converter B0550LD-1WR2 & B0560LD-1WR2 Storage Temperature Casing Temperature Rise Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds Storage Humidity Switching Frequency 100% load, nominal input voltage Physical Specifications Casing Material Black flame-retardant and heat-resistant plastic (UL94 V-0) Cooling Method CISPR25 CLASS 3 (see Fig. 4 for recommended circuit) CISPR25 CLASS 3 (see Fig. 4 for recommended circuit) Temperature Derating Curve Output Power Percent(%) Output Voltage Accuracy (%) Product Characteristic Curve Safe Operating Area Output...

Open the catalog to page 2

2. EMC solution-recommended circu LDM Vin °- C1 3. Output load requirements In order to ensure the converter can work reliably with high efficiency, the minimum load should not less than 10% rated load when it is used. If the needed power is indeed small, please parallel a resistor on the output side (The sum of the efficient power and resistor consumption power is not less than 10%). 4. For more information please find the application notes on www.mornsun-power.com Dimensions and Recommended Layout THIRD ANGLE PROJECTION- Front View Unit :mm[inch] NC:Not avai ab e for e ectrica connection MORNSUN...

Open the catalog to page 3

1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58200009; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25"C, humidity<75%RH with nominal input voltage and rated output load; 5. All index testing methods in...

Open the catalog to page 4